Finished flat front variant of the shirt

1 files changed, 8 insertions, 2 deletions

diff --git a/source/historical_menswear/shirts/1880s_shirt/index.rst b/source/historical_menswear/shirts/1880s_shirt/index.rst
index e88f62a..aad06dc 100644
--- a/source/historical_menswear/shirts/1880s_shirt/index.rst
+++ b/source/historical_menswear/shirts/1880s_shirt/index.rst
@@ -222,8 +222,8 @@ Cut the full rectangles for the front and back.
 
 If you already have done a shirt in this size, and have the :ref:`paper
 pattern for the armscyes <1880s_shirt_marking_armscyes>`, mark the seam
-lines on the front and back, and if you want cut them with a double
-seaming allowance.
+lines on the front and back, and if you are sure about them cut them
+with a double seaming allowance.
 
 .. figure:: gri_33125012088023-770.svg
    :align: center
@@ -676,6 +676,9 @@ Variants
 Flat front
 ^^^^^^^^^^
 
+.. figure:: 0801-cuts.jpg
+   :align: center
+
 To cut a front with no pleats, cut out a rectangle from the center front
 that is as wide as the calculated ``#gathers_eccess`` in the pattern and
 as deep as the ``#front_slit_length``.
@@ -685,6 +688,9 @@ plus an additional ``(#front_gathers_width - #button_placket_width) / 2``:
 this will be wider than the front slit that would have been cut for a
 front with pleats, and is required to have space for the gathers below.
 
+.. figure:: 0802-ready.jpg
+   :align: center
+
 Fold down the button placket twice either to the right or the wrong
 side, as described above, hemstitch the right placket and topstitch the
 left.