From 2ec8fba01fdf0f7879805280df539e43329f4dc7 Mon Sep 17 00:00:00 2001 From: Elena ``of Valhalla'' Grandi Date: Thu, 19 Jan 2023 09:25:19 +0100 Subject: Finished flat front variant of the shirt --- source/historical_menswear/shirts/1880s_shirt/index.rst | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'source/historical_menswear/shirts/1880s_shirt/index.rst') diff --git a/source/historical_menswear/shirts/1880s_shirt/index.rst b/source/historical_menswear/shirts/1880s_shirt/index.rst index e88f62a..aad06dc 100644 --- a/source/historical_menswear/shirts/1880s_shirt/index.rst +++ b/source/historical_menswear/shirts/1880s_shirt/index.rst @@ -222,8 +222,8 @@ Cut the full rectangles for the front and back. If you already have done a shirt in this size, and have the :ref:`paper pattern for the armscyes <1880s_shirt_marking_armscyes>`, mark the seam -lines on the front and back, and if you want cut them with a double -seaming allowance. +lines on the front and back, and if you are sure about them cut them +with a double seaming allowance. .. figure:: gri_33125012088023-770.svg :align: center @@ -676,6 +676,9 @@ Variants Flat front ^^^^^^^^^^ +.. figure:: 0801-cuts.jpg + :align: center + To cut a front with no pleats, cut out a rectangle from the center front that is as wide as the calculated ``#gathers_eccess`` in the pattern and as deep as the ``#front_slit_length``. @@ -685,6 +688,9 @@ plus an additional ``(#front_gathers_width - #button_placket_width) / 2``: this will be wider than the front slit that would have been cut for a front with pleats, and is required to have space for the gathers below. +.. figure:: 0802-ready.jpg + :align: center + Fold down the button placket twice either to the right or the wrong side, as described above, hemstitch the right placket and topstitch the left. -- cgit v1.2.3