Use system installed slic3r (1.1.6)

1 files changed, 39 insertions, 33 deletions

diff --git a/conf/connectors.ini b/conf/connectors.ini
index 501cea6..f26513c 100644
--- a/conf/connectors.ini
+++ b/conf/connectors.ini
@@ -1,26 +1,25 @@
-# generated by Slic3r 0.9.10b on Wed Apr  9 21:24:36 2014
-avoid_crossing_perimeters = 0
+# generated by Slic3r 1.1.6 on Thu Aug 21 10:00:53 2014
+avoid_crossing_perimeters = 1
 bed_size = 200,200
 bed_temperature = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
-bridge_speed = 60
+bridge_speed = 80
 brim_width = 0
-complete_objects = 1
+complete_objects = 0
 cooling = 1
 default_acceleration = 0
 disable_fan_first_layers = 1
-duplicate = 1
+dont_support_bridges = 1
 duplicate_distance = 6
-duplicate_grid = 1,1
-end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
 external_perimeter_speed = 70%
 external_perimeters_first = 0
 extra_perimeters = 1
-extruder_clearance_height = 40
-extruder_clearance_radius = 40
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
 extruder_offset = 0x0
 extrusion_axis = E
 extrusion_multiplier = 1
@@ -29,13 +28,14 @@ fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 3
 fill_angle = 45
-fill_density = 0.5
+fill_density = 40%
 fill_pattern = honeycomb
+first_layer_acceleration = 0
 first_layer_bed_temperature = 0
 first_layer_extrusion_width = 200%
-first_layer_height = 0.25
-first_layer_speed = 50%
-first_layer_temperature = 205
+first_layer_height = 0.3
+first_layer_speed = 40%
+first_layer_temperature = 200
 g0 = 0
 gap_fill_speed = 20
 gcode_arcs = 0
@@ -47,68 +47,74 @@ infill_extruder = 1
 infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
-infill_speed = 60
+infill_speed = 80
+interface_shells = 0
 layer_gcode = 
-layer_height = 0.25
+layer_height = 0.3
 max_fan_speed = 100
 min_fan_speed = 35
-min_print_speed = 10
-min_skirt_length = 0
+min_print_speed = 4
+min_skirt_length = 2
 notes = 
 nozzle_diameter = 0.5
 only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
+overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 30
+perimeter_speed = 40
 perimeters = 3
 post_process = 
 print_center = 100,100
 raft_layers = 0
-randomize_start = 0
 resolution = 0
 retract_before_travel = 2
 retract_layer_change = 1
-retract_length = 1
+retract_length = 2
 retract_length_toolchange = 10
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 30
-rotate = 0
-scale = 1
+seam_position = aligned
 skirt_distance = 6
 skirt_height = 1
-skirts = 2
+skirts = 1
 slowdown_below_layer_time = 30
 small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extrusion_width = 0
-solid_infill_speed = 60
+solid_infill_speed = 80
 spiral_vase = 0
-start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle
+standby_temperature_delta = -5
+start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
 support_material = 1
-support_material_angle = 90
-support_material_enforce_layers = 1
+support_material_angle = 0
+support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
-support_material_interface_layers = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
 support_material_interface_spacing = 0
-support_material_pattern = rectilinear
-support_material_spacing = 3.5
+support_material_interface_speed = 100%
+support_material_pattern = pillars
+support_material_spacing = 2.5
 support_material_speed = 60
 support_material_threshold = 0
-temperature = 205
+temperature = 195
+thin_walls = 1
 threads = 2
 toolchange_gcode = 
-top_infill_extrusion_width = 0
+top_infill_extrusion_width = 85%
 top_solid_infill_speed = 50
 top_solid_layers = 5
 travel_speed = 130
+use_firmware_retraction = 0
 use_relative_e_distances = 0
 vibration_limit = 0
 wipe = 0
-z_offset = -0.4
+z_offset = 0