From 0ec1f68d81537c0f476f504ba326fe8c36199a07 Mon Sep 17 00:00:00 2001 From: Elena of Valhalla'' Grandi Date: Fri, 22 Aug 2014 11:13:51 +0200 Subject: Use system installed slic3r (1.1.6) --- conf/connectors.ini | 72 +++++++++++++++++++++++++++++------------------------ 1 file changed, 39 insertions(+), 33 deletions(-) (limited to 'conf/connectors.ini') diff --git a/conf/connectors.ini b/conf/connectors.ini index 501cea6..f26513c 100644 --- a/conf/connectors.ini +++ b/conf/connectors.ini @@ -1,26 +1,25 @@ -# generated by Slic3r 0.9.10b on Wed Apr 9 21:24:36 2014 -avoid_crossing_perimeters = 0 +# generated by Slic3r 1.1.6 on Thu Aug 21 10:00:53 2014 +avoid_crossing_perimeters = 1 bed_size = 200,200 bed_temperature = 0 bottom_solid_layers = 3 bridge_acceleration = 0 bridge_fan_speed = 100 bridge_flow_ratio = 1 -bridge_speed = 60 +bridge_speed = 80 brim_width = 0 -complete_objects = 1 +complete_objects = 0 cooling = 1 default_acceleration = 0 disable_fan_first_layers = 1 -duplicate = 1 +dont_support_bridges = 1 duplicate_distance = 6 -duplicate_grid = 1,1 -end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors +end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n external_perimeter_speed = 70% external_perimeters_first = 0 extra_perimeters = 1 -extruder_clearance_height = 40 -extruder_clearance_radius = 40 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 extruder_offset = 0x0 extrusion_axis = E extrusion_multiplier = 1 @@ -29,13 +28,14 @@ fan_always_on = 0 fan_below_layer_time = 60 filament_diameter = 3 fill_angle = 45 -fill_density = 0.5 +fill_density = 40% fill_pattern = honeycomb +first_layer_acceleration = 0 first_layer_bed_temperature = 0 first_layer_extrusion_width = 200% -first_layer_height = 0.25 -first_layer_speed = 50% -first_layer_temperature = 205 +first_layer_height = 0.3 +first_layer_speed = 40% +first_layer_temperature = 200 g0 = 0 gap_fill_speed = 20 gcode_arcs = 0 @@ -47,68 +47,74 @@ infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 -infill_speed = 60 +infill_speed = 80 +interface_shells = 0 layer_gcode = -layer_height = 0.25 +layer_height = 0.3 max_fan_speed = 100 min_fan_speed = 35 -min_print_speed = 10 -min_skirt_length = 0 +min_print_speed = 4 +min_skirt_length = 2 notes = nozzle_diameter = 0.5 only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 output_filename_format = [input_filename_base].gcode +overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 -perimeter_speed = 30 +perimeter_speed = 40 perimeters = 3 post_process = print_center = 100,100 raft_layers = 0 -randomize_start = 0 resolution = 0 retract_before_travel = 2 retract_layer_change = 1 -retract_length = 1 +retract_length = 2 retract_length_toolchange = 10 retract_lift = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 30 -rotate = 0 -scale = 1 +seam_position = aligned skirt_distance = 6 skirt_height = 1 -skirts = 2 +skirts = 1 slowdown_below_layer_time = 30 small_perimeter_speed = 30 solid_fill_pattern = rectilinear solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extrusion_width = 0 -solid_infill_speed = 60 +solid_infill_speed = 80 spiral_vase = 0 -start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle +standby_temperature_delta = -5 +start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n support_material = 1 -support_material_angle = 90 -support_material_enforce_layers = 1 +support_material_angle = 0 +support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0 -support_material_interface_layers = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 support_material_interface_spacing = 0 -support_material_pattern = rectilinear -support_material_spacing = 3.5 +support_material_interface_speed = 100% +support_material_pattern = pillars +support_material_spacing = 2.5 support_material_speed = 60 support_material_threshold = 0 -temperature = 205 +temperature = 195 +thin_walls = 1 threads = 2 toolchange_gcode = -top_infill_extrusion_width = 0 +top_infill_extrusion_width = 85% top_solid_infill_speed = 50 top_solid_layers = 5 travel_speed = 130 +use_firmware_retraction = 0 use_relative_e_distances = 0 vibration_limit = 0 wipe = 0 -z_offset = -0.4 +z_offset = 0 -- cgit v1.2.3