sphinx docs

8 files changed, 166 insertions, 0 deletions

diff --git a/docs/.gitignore b/docs/.gitignore
new file mode 100644
index 0000000..378eac2
--- /dev/null
+++ b/docs/.gitignore
@@ -0,0 +1 @@
+build
diff --git a/docs/Makefile b/docs/Makefile
new file mode 100644
index 0000000..d0c3cbf
--- /dev/null
+++ b/docs/Makefile
@@ -0,0 +1,20 @@
+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line, and also
+# from the environment for the first two.
+SPHINXOPTS    ?=
+SPHINXBUILD   ?= sphinx-build
+SOURCEDIR     = source
+BUILDDIR      = build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
diff --git a/docs/make.bat b/docs/make.bat
new file mode 100644
index 0000000..6fcf05b
--- /dev/null
+++ b/docs/make.bat
@@ -0,0 +1,35 @@
+@ECHO OFF

+

+pushd %~dp0

+

+REM Command file for Sphinx documentation

+

+if "%SPHINXBUILD%" == "" (

+	set SPHINXBUILD=sphinx-build

+)

+set SOURCEDIR=source

+set BUILDDIR=build

+

+if "%1" == "" goto help

+

+%SPHINXBUILD% >NUL 2>NUL

+if errorlevel 9009 (

+	echo.

+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx

+	echo.installed, then set the SPHINXBUILD environment variable to point

+	echo.to the full path of the 'sphinx-build' executable. Alternatively you

+	echo.may add the Sphinx directory to PATH.

+	echo.

+	echo.If you don't have Sphinx installed, grab it from

+	echo.https://www.sphinx-doc.org/

+	exit /b 1

+)

+

+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%

+goto end

+

+:help

+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS% %O%

+

+:end

+popd

diff --git a/docs/source/conf.py b/docs/source/conf.py
new file mode 100644
index 0000000..d8dade9
--- /dev/null
+++ b/docs/source/conf.py
@@ -0,0 +1,59 @@
+# Configuration file for the Sphinx documentation builder.
+#
+# This file only contains a selection of the most common options. For a full
+# list see the documentation:
+# https://www.sphinx-doc.org/en/master/usage/configuration.html
+
+# -- Path setup --------------------------------------------------------------
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
+# import os
+# import sys
+# sys.path.insert(0, os.path.abspath('.'))
+
+
+# -- Project information -----------------------------------------------------
+
+project = 'hazwaz'
+copyright = '2022, Elena Grandi'
+author = 'Elena “of Valhalla” Grandi'
+
+# The full version, including alpha/beta/rc tags
+release = '0.0.1'
+# The major project version
+version = '0.0'
+
+
+# -- General configuration ---------------------------------------------------
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = [
+    'sphinx.ext.autodoc',
+    'sphinx.ext.viewcode',
+]
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This pattern also affects html_static_path and html_extra_path.
+exclude_patterns = []
+
+
+# -- Options for HTML output -------------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+html_theme = 'alabaster'
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
diff --git a/docs/source/index.rst b/docs/source/index.rst
new file mode 100644
index 0000000..2b5c1f0
--- /dev/null
+++ b/docs/source/index.rst
@@ -0,0 +1,25 @@
+.. hazwaz documentation master file, created by
+   sphinx-quickstart on Tue Feb 22 20:02:16 2022.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
+.. include:: ../../README.rst
+
+Documentation
+-------------
+
+Contents
+--------
+
+.. toctree::
+   :maxdepth: 2
+   :caption: Contents:
+
+   reference/modules
+
+Indices and tables
+------------------
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
diff --git a/docs/source/reference/hazwaz.command.rst b/docs/source/reference/hazwaz.command.rst
new file mode 100644
index 0000000..1f5d87d
--- /dev/null
+++ b/docs/source/reference/hazwaz.command.rst
@@ -0,0 +1,7 @@
+hazwaz.command module
+=====================
+
+.. automodule:: hazwaz.command
+   :members:
+   :undoc-members:
+   :show-inheritance:
diff --git a/docs/source/reference/hazwaz.rst b/docs/source/reference/hazwaz.rst
new file mode 100644
index 0000000..61d829e
--- /dev/null
+++ b/docs/source/reference/hazwaz.rst
@@ -0,0 +1,13 @@
+hazwaz package
+==============
+
+.. automodule:: hazwaz
+   :members:
+   :undoc-members:
+   :show-inheritance:
+
+Submodules
+----------
+
+.. toctree::
+   hazwaz.command
diff --git a/docs/source/reference/modules.rst b/docs/source/reference/modules.rst
new file mode 100644
index 0000000..536bd19
--- /dev/null
+++ b/docs/source/reference/modules.rst
@@ -0,0 +1,6 @@
+hazwaz reference
+================
+
+.. toctree::
+
+   hazwaz