path: root/ds1307/arduino_sketch/fuzzy_alarm_clock_ds1307.pde

#include <Wire.h>

#include <RealTimeClockDS1307.h>

// minutes of "dawn" before alarm
#define TIN 30
// "dawn" + "daylight"
#define TDAY 45
// "dawn" + "daylight" + blue blinding light
#define TOUT 75

// number of available alarms; max 10 for storage in the DS1307 ram 
#define NALARMS 4

// pins and addressed
#define RPIN 3
#define YPIN 5
#define BPIN 6

int st = 0; // alarm status (minutes from alarm - TIN)
char alarms[NALARMS][5]; // alarm settings
char cmin; // current minute
int a = -1; // current alarm
char dbg = 0; // print debug informations

void setup () {
    Serial.begin(9600);
    Wire.begin();

    pinMode(RPIN,OUTPUT);
    pinMode(YPIN,OUTPUT);
    pinMode(BPIN,OUTPUT);

    digitalWrite(RPIN,255);
    digitalWrite(YPIN,255);
    digitalWrite(BPIN,0);
   
    // DEBUG: we want to read the setup messages
    
    delay(5000);
    digitalWrite(YPIN,0);

    // if the RTC is already running read alarms and status, 
    // otherwise set everything to the default
    if ( RTC.readData(0x00) >> 7 ) {
        Serial.println("Setup the clock");
        for ( int i = 0 ; i < NALARMS ; i ++ ) {
            for ( int j = 0; j < 5 ; j ++ ) {
                alarms[i][j] = 0;
            }
        }
        st = 0;
        a = -1;
    } else {
        st = RTC.readData(0x08);
        a = RTC.readData(0x09);
        cmin = RTC.readData(0x0a);
        // FIXME: we want to update st to the time passed 
        // since the data was saved
        for ( int i = 0; i < NALARMS ; i ++ ) {
            for ( int j = 0; j < 5 ; j ++ ) {
                alarms[i][j] = RTC.readData(0x0b + i*5 + j);
            }
        }
    }
    
}

void loop () {
  
  // read commands from serial
  check_serial();
  
  // read time, check alarms
  check_time();

  if ( dbg ) {
      s_print_time();
      Serial.print("st: ");
      Serial.print(st,DEC);
      Serial.print(", a: ");
      Serial.print(a,DEC);
      Serial.print(", cmin: ");
      Serial.println(cmin,DEC);
  }
  
  // act on status: LEDs and buzzer
  if ( st > 0 ) {
      set_leds();
  }
  
  // wait about till the next second

  delay(1000);
  
}

// ****** Serial interface management *************************************** //

void check_serial() {
    int rec = Serial.read();
    switch (rec) {
        case 'a':
            s_set_alarm();
            break;
        case 's':
            s_set_time();
            break;
        case 'p':
            s_print_alarms();
            break;
        case 't':
            s_print_time();
            break;
        case 'd':
            s_toggle_debug();
            break;
        case 'h':
            s_print_help();
            break;
    }
}

void s_set_alarm() {
    int i = s_read_dig();
    for ( int j = 0; j < 5 ; j++) {
        alarms[i][j] = s_read_2hex();
    }
    for ( int j = 0; j < 5 ; j++ ) {
        RTC.writeData(0x0b + i*5 + j,alarms[i][j]);
    }
    Serial.print("Alarm ");
    Serial.print(i,DEC);
    Serial.println(" set.");
}

void s_set_time() {
    RTC.setYear(s_read_2dig());
    RTC.setMonth(s_read_2dig());
    RTC.setDate(s_read_2dig());
    RTC.setDayOfWeek(s_read_dig());
    RTC.setHours(s_read_2dig());
    RTC.setMinutes(s_read_2dig());
    RTC.setSeconds(s_read_2dig());
    RTC.setClock();
    Serial.print("Time set: ");
    s_print_time();
}

int s_read_dig() {
    int rec;
    rec = Serial.read();
    while ( rec == -1 ) {
        rec = Serial.read();
    }
    return rec - 48;
}

int s_read_2dig() {
    int n;
    n = s_read_dig() * 10;
    n = n + s_read_dig();
    return n;
}

int s_read_hex() {
    int rec;
    rec = Serial.read();
    while ( rec == -1 ) {
        rec = Serial.read();
    }
    if ( rec >= 48 && rec < 58 ) {
        return rec - 48;
    } else if ( rec >= 65 && rec < 71 ) {
        return rec - 55;
    } else if ( rec > 97 && rec < 102 ) {
        return rec - 87;
    } else {
        return 0;
    }
}

int s_read_2hex() {
    int n;
    n = s_read_hex() * 16;
    n = n + s_read_hex();
    return n;
}

void s_print_alarms() {
    for ( int i = 0; i < NALARMS ; i++) {
        Serial.print(i,DEC);
        Serial.print(" - ");
        for ( int j = 0; j < 5 ; j++) {
            Serial.print(alarms[i][j],DEC);
            Serial.print(" ");
        }
        Serial.println("");
    }
}

void s_print_time() {
    RTC.readClock();
    Serial.print(RTC.getYear(),DEC);
    Serial.print("/");
    Serial.print(RTC.getMonth(),DEC);
    Serial.print("/");
    Serial.print(RTC.getDate(),DEC);
    Serial.print(" (");
    Serial.print(RTC.getDayOfWeek(),DEC);
    Serial.print(") ");
    Serial.print(RTC.getHours(),DEC);
    Serial.print(":");
    Serial.print(RTC.getMinutes(),DEC);
    Serial.print(":");
    Serial.println(RTC.getSeconds(),DEC);
}

void s_toggle_debug() {
    if ( dbg ) {
        dbg = 0;
    } else {
        dbg = 1;
    }
}

void s_print_help() {
    Serial.println("");
    Serial.println("  a<s> - set an alarm");
    Serial.println("         <s> is");
    Serial.println("  s<s> - set the clock");
    Serial.println("         <s> is yymmgguHHMMSS");
    Serial.println("  p    - print the alarms");
    Serial.println("  t    - print the clock");
    Serial.println("  d    - toggle printing of debug informations");
    Serial.println("  h    - print this help");
}

// ****** Time management *************************************************** //

// Set the current time
void set_time(int y,int m,int d, int w, int hh, int mm, int ss) {
    RTC.setYear(y);
    RTC.setMonth(m);
    RTC.setDate(m);
    RTC.setDayOfWeek(w);
    RTC.setHours(hh);
    RTC.setMinutes(mm);
    RTC.setSeconds(ss);
    RTC.switchTo24h();
    RTC.setClock();
}

void check_time() {
    RTC.readClock();

    int mm = RTC.getMinutes();
    int hour = RTC.getHours();
    int wday = RTC.getDayOfWeek();
    int day = RTC.getDate();
    int month = RTC.getMonth();

    if ( a < 0 ) {
        for ( int i = 0; i < NALARMS ; i ++ ) {
            // check alarm i
            if ( ( alarms[i][0] & ( 1 << (wday - 1) ) ) || 
                    (month == alarms[i][1] && day == alarms[i][2]) ) {
                // this is alarm day!
                if ( hour == alarms[i][3] && mm == alarms[i][4]) {
                    // this is alarm hour!
                    a = i;
                    st = 1;
                    cmin = mm;
                    if ( ( alarms[i][0] & 128 ) == 0 ) {
                        // this alarm won't be repeated
                        alarms[i] = { 0,0,0,0,0 };
                        for ( int j = 0; j < 5 ; j++ ) {
                            RTC.writeData(0x0b + i*5 + j,0);
                        }
                    }
                    break;
                }
            } 
        }
    } else {
        if ( cmin != mm ) {
            cmin = mm;
            st++;
        } 
    }

}

// ****** LED management **************************************************** //

void set_leds() {
  if ( st > 0 && st <= TIN) {
      int y = int(float(st*255)/TIN);
      int r = 255 - y;
      analogWrite(RPIN,r);
      analogWrite(YPIN,y);
  } else if ( st > TIN && st < TDAY ) {
      analogWrite(RPIN,0);
      analogWrite(YPIN,255);
      analogWrite(BPIN,0);
  } else if (st >= TDAY && st < TOUT) {
      analogWrite(RPIN,0);
      analogWrite(YPIN,0);
      analogWrite(BPIN,255);
  } else if (st == TOUT) {
      // reset stuff
      st = 0;
      a = -1;
      analogWrite(RPIN,255);
      analogWrite(YPIN,0);
      analogWrite(BPIN,0);
  }
}

// vim: set filetype=c: