Square hood: instructions on liningHEADmaster

2 files changed, 23 insertions, 0 deletions

diff --git a/source/contemporary_unisex/headwear/square_hood/0201-lined.jpg b/source/contemporary_unisex/headwear/square_hood/0201-lined.jpg
new file mode 100644
index 0000000..ed2aaf9
--- /dev/null
+++ b/source/contemporary_unisex/headwear/square_hood/0201-lined.jpg
diff --git a/source/contemporary_unisex/headwear/square_hood/index.rst b/source/contemporary_unisex/headwear/square_hood/index.rst
index bae4d70..7414af0 100644
--- a/source/contemporary_unisex/headwear/square_hood/index.rst
+++ b/source/contemporary_unisex/headwear/square_hood/index.rst
@@ -108,6 +108,29 @@ Then fold the gore on the diagonal, insert it into the hood as before,
 and whipstitch starting from the bottom, this time stopping just above
 the the point of the square to leave an opening for the face.
 
+Variants
+--------
+
+Lined hood
+^^^^^^^^^^
+
+If your fabric requires, you can also line the hood: cut each piece
+twice in both fabric and lining.
+
+On the outer fabric, press down all edges once by the hemming allowance,
+mitering the corners.
+
+On the lining, press down all edges once by a couple mm more than the
+hemming allowance, mitering again the corners.
+
+.. figure:: 0201-lined.jpg
+   :align: center
+
+Put the lining over the outer fabric, wrong sides together, and
+hemstitch all sides.
+
+Continue with the assembly instructions above.
+
 Gallery
 -------