1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
|
Braided Twine Soles
===================
.. figure:: almost_finished_top.jpg
:align: center
A sole made of braided twine, suitable for various kinds of slippers.
This isn't The Traditional Way to make espadrille style soles, it's just
a method I've used and that seems to work. I don't know The Traditional
Method and couldn't find details on it online, so this way may be
similar, except I'm doing something horribly wrong.
Materials
---------
Yarn
^^^^
* 3-4 mm twine;
* sturdy sewing thread.
As a sewing thread I've used 4-ply waxed linen designed for bookbinding,
marked with a number 14 (I'm not sure on which scale, however).
Tools
^^^^^
* paper pattern for the sole;
* 6 elastics;
* a binder clip, optional;
* strong needle, ideally curved;
* a needle as long as the sole will be wide, optional.
The pattern will depend on what the sole will be used for: for sewn
shoes you will probably have a regular pattern, for knit / crocheted
ones you can trace around the finished object, and to make a sandal you
can trace around a foot adding a bit of ease and smoothing out the shape.
You don't need to buy curved needles: regular needles can be curved
with the help of an heat source such as a hot air soldering station or a
candle flame, pliers and eye protections.
Directions
----------
Cut 3 long pieces of twine: 10 m for each piece were barely enough for
a 25 cm foot.
Find the middle point and tie the strands together with a scrap of
thread.
.. figure:: 01-braiding.jpg
:align: center
Starting close from the middle, loop each strand around your fingers to
form a butterfly, wrap it with an elastic.
Make a 3-strands rounded braid: each strand is made of the two sides of
a piece of twine, and fold the strand towards the front to bring it to
the middle while braiding, rather than curving it to the side as for a
flat braid.
Keep braiding until the end, keep it in place with a binder clip (or
just leave it hanging and rebraid it if needed).
.. figure:: 02-pinning_outer_round.jpg
:align: center
Put the paper pattern on a pinnable surface and starting from the toe
pin the braid vertically all around the pattern.
.. figure:: 03-sew_outer_rounds.jpg
:align: center
When you have finished the first round, lay the braid
towards the middle of the sole, whipstitching it to the outer round.
.. figure:: 04-third_round.jpg
:align: center
And keep working like this, whipstitching each round of braid to the one
next to it.
Hide all knots between the braid sections.
.. figure:: 05-wider_part.jpg
:align: center
After a while, you won't be able to add more rope to the narrower part
of the sole; start making shorter rounds just in the wider part.
.. figure:: 06-cutting.jpg
:align: center
When even the wider part is full cut the braid to size
.. figure:: 07-sewing_middle.jpg
:align: center
and finish whipstitching the remaining open parts, including the one
that was left in the narrower part of the sole.
.. figure:: 08-bottom_open.jpg
:align: center
Now you can remove the pins and the sole will keep its shape, but the
bottom part will tend to open up, enabling dirt and other unwanted
material to creep into it, so you need to stabilize everything by
stitching it from side to side.
.. figure:: 09-side_to_side_sewing.jpg
:align: center
If you have a long needle you can insert it from one side of the sole to
the other one, but if you don't (or if your long needle is to thick and
you can't insert it into the braid) you'll have to go through 2–3 braids
at a time with the curved needle.
.. figure:: 10-from_the_side.jpg
:align: center
When you get to one end pull tight to compact the braids, and then go
back into the sole for the next line. Keep hiding all knots between the
braids.
Now start again for the second sole, remembering to turn the pattern
upside down if it's shaped to have a right and a left foot.
Attach the soles to the shoes with the whipstitched part on top;
depending on how the shoes are made a blanket stitch will probably work
nicely.
..
Gallery
-------
.. .. figure::
:align: center
:alt: .
|
