Updated Makefile and slic3r config

1 files changed, 33 insertions, 22 deletions

diff --git a/conf/connectors.ini b/conf/connectors.ini
index f26513c..0e4f3a8 100644
--- a/conf/connectors.ini
+++ b/conf/connectors.ini
@@ -1,21 +1,24 @@
-# generated by Slic3r 1.1.6 on Thu Aug 21 10:00:53 2014
+# generated by Slic3r 1.2.9 on Tue Nov 10 17:43:16 2015
 avoid_crossing_perimeters = 1
-bed_size = 200,200
+bed_shape = 0x0,200x0,200x200,0x200
 bed_temperature = 0
+before_layer_gcode = 
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
-bridge_speed = 80
+bridge_speed = 60
 brim_width = 0
 complete_objects = 0
 cooling = 1
 default_acceleration = 0
-disable_fan_first_layers = 1
+disable_fan_first_layers = 3
 dont_support_bridges = 1
 duplicate_distance = 6
 end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
-external_perimeter_speed = 70%
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 50%
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
@@ -26,6 +29,7 @@ extrusion_multiplier = 1
 extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
+filament_colour = #FFFFFF
 filament_diameter = 3
 fill_angle = 45
 fill_density = 40%
@@ -33,10 +37,9 @@ fill_pattern = honeycomb
 first_layer_acceleration = 0
 first_layer_bed_temperature = 0
 first_layer_extrusion_width = 200%
-first_layer_height = 0.3
-first_layer_speed = 40%
-first_layer_temperature = 200
-g0 = 0
+first_layer_height = 0.25
+first_layer_speed = 30
+first_layer_temperature = 205
 gap_fill_speed = 20
 gcode_arcs = 0
 gcode_comments = 0
@@ -47,16 +50,21 @@ infill_extruder = 1
 infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
+infill_overlap = 15%
 infill_speed = 80
 interface_shells = 0
 layer_gcode = 
-layer_height = 0.3
+layer_height = 0.25
 max_fan_speed = 100
+max_print_speed = 80
+max_volumetric_speed = 0
 min_fan_speed = 35
 min_print_speed = 4
-min_skirt_length = 2
+min_skirt_length = 5
 notes = 
 nozzle_diameter = 0.5
+octoprint_apikey = 
+octoprint_host = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
@@ -64,36 +72,37 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 40
+perimeter_speed = 60
 perimeters = 3
 post_process = 
-print_center = 100,100
+pressure_advance = 0
 raft_layers = 0
 resolution = 0
 retract_before_travel = 2
-retract_layer_change = 1
+retract_layer_change = 0
 retract_length = 2
 retract_length_toolchange = 10
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 30
+retract_speed = 40
 seam_position = aligned
 skirt_distance = 6
 skirt_height = 1
-skirts = 1
+skirts = 2
 slowdown_below_layer_time = 30
-small_perimeter_speed = 30
-solid_fill_pattern = rectilinear
+small_perimeter_speed = 15
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
+solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
-solid_infill_speed = 80
+solid_infill_speed = 20
 spiral_vase = 0
 standby_temperature_delta = -5
 start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
 support_material = 1
 support_material_angle = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
@@ -109,12 +118,14 @@ temperature = 195
 thin_walls = 1
 threads = 2
 toolchange_gcode = 
-top_infill_extrusion_width = 85%
-top_solid_infill_speed = 50
-top_solid_layers = 5
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 15
+top_solid_layers = 3
 travel_speed = 130
 use_firmware_retraction = 0
 use_relative_e_distances = 0
+use_volumetric_e = 0
 vibration_limit = 0
 wipe = 0
+xy_size_compensation = 0
 z_offset = 0