Improved gcode generation

3 files changed, 120 insertions, 3 deletions

diff --git a/Makefile b/Makefile
index 70e0a9e..fc3de67 100644
--- a/Makefile
+++ b/Makefile
@@ -78,7 +78,7 @@ gcode: tiles coins dice pawns saucers pyramids
 	for T in ${DESTDIR}/tile*.stl; do \
 	    ${SLIC3R} --load ${CONFDIR}/tiles.ini $$T; \
 	done 
-	for T in ${DESTDIR}/coin*.stl ${DESTDIR}/saucer*.stl; do \
+	for T in ${DESTDIR}/coin*.stl; do \
 	    ${SLIC3R} --load ${CONFDIR}/coins.ini $$T; \
 	done 
 	for T in ${DESTDIR}/die*.stl ${DESTDIR}/suite_die*.stl; do \
@@ -87,6 +87,9 @@ gcode: tiles coins dice pawns saucers pyramids
 	for T in ${DESTDIR}/pawn*.stl ${DESTDIR}/pawn*.stl; do \
 	    ${SLIC3R} --load ${CONFDIR}/pawns.ini $$T; \
 	done 
+	for T in ${DESTDIR}/saucer*.stl; do \
+	    ${SLIC3R} --load ${CONFDIR}/saucers.ini $$T; \
+	done 
 	for T in ${DESTDIR}/pyramid*.stl; do \
 	    ${SLIC3R} --load ${CONFDIR}/pyramids.ini $$T; \
 	done 
diff --git a/conf/pawns.ini b/conf/pawns.ini
index 73f4966..da36324 100644
--- a/conf/pawns.ini
+++ b/conf/pawns.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 0.9.10b on Fri Dec  6 12:45:52 2013
+# generated by Slic3r 0.9.10b on Tue Mar 11 13:03:22 2014
 avoid_crossing_perimeters = 1
 bed_size = 200,200
 bed_temperature = 0
@@ -104,7 +104,7 @@ support_material_threshold = 0
 temperature = 185
 threads = 2
 toolchange_gcode = 
-top_infill_extrusion_width = 150%
+top_infill_extrusion_width = 170%
 top_solid_infill_speed = 50
 top_solid_layers = 5
 travel_speed = 130
diff --git a/conf/saucers.ini b/conf/saucers.ini
new file mode 100644
index 0000000..27fe89c
--- /dev/null
+++ b/conf/saucers.ini
@@ -0,0 +1,114 @@
+# generated by Slic3r 0.9.10b on Tue Mar 11 13:02:00 2014
+avoid_crossing_perimeters = 1
+bed_size = 200,200
+bed_temperature = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 90
+brim_width = 0
+complete_objects = 1
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
+external_perimeter_speed = 70%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 40
+extruder_clearance_radius = 40
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 3
+fill_angle = 45
+fill_density = 0.6
+fill_pattern = honeycomb
+first_layer_bed_temperature = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.15
+first_layer_speed = 40%
+first_layer_temperature = 205
+g0 = 0
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_speed = 60
+layer_gcode = 
+layer_height = 0.10
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+min_skirt_length = 0
+notes = 
+nozzle_diameter = 0.5
+only_retract_when_crossing_perimeters = 1
+output_filename_format = [input_filename_base].gcode
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 150%
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_center = 100,100
+raft_layers = 0
+randomize_start = 0
+resolution = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+rotate = 0
+scale = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 3
+slowdown_below_layer_time = 30
+small_perimeter_speed = 30
+solid_fill_pattern = concentric
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
+spiral_vase = 0
+start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle
+support_material = 
+support_material_angle = 0
+support_material_enforce_layers = 1
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+temperature = 185
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 170%
+top_solid_infill_speed = 45
+top_solid_layers = 5
+travel_speed = 130
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 0
+z_offset = -0.4