New source layout; added d6 and pips faces

4 files changed, 165 insertions, 0 deletions

diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..943c209
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,27 @@
+
+BUILDDIR = build
+CONFDIR = conf
+SRCDIR = designs
+
+SLIC3R = ~/opt/Slic3r/bin/slic3r
+
+VPATH = $(SRCDIR):$(BUILDDIR)
+
+STL_TARGETS = $(patsubst $(SRCDIR)/%.scad,$(BUILDDIR)/%.stl,$(wildcard $(SRCDIR)/*.scad))
+GCODE_TARGETS = $(patsubst $(SRCDIR)/%.scad,$(BUILDDIR)/%.gcode,$(wildcard $(SRCDIR)/*.scad))
+
+.PHONY: all gcode clean
+all: $(STL_TARGETS)
+
+gcode: $(GCODE_TARGETS)
+
+$(BUILDDIR)/%.stl: %.scad
+	mkdir -p ${BUILDDIR}
+	openscad -o $@ $^
+
+$(BUILDDIR)/%.gcode: %.stl
+	${SLIC3R} --load ${CONFDIR}/dice.ini $^
+
+clean:
+	rm -f ${BUILDDIR}/*.stl ${BUILDDIR}/*.gcode
+
diff --git a/conf/dice.ini b/conf/dice.ini
new file mode 100644
index 0000000..224b55f
--- /dev/null
+++ b/conf/dice.ini
@@ -0,0 +1,114 @@
+# generated by Slic3r 0.9.10b on Sun Jun 22 10:44:47 2014
+avoid_crossing_perimeters = 1
+bed_size = 200,200
+bed_temperature = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+complete_objects = 
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
+external_perimeter_speed = 70%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 40
+extruder_clearance_radius = 40
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 3
+fill_angle = 45
+fill_density = 0.4
+fill_pattern = rectilinear
+first_layer_bed_temperature = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.25
+first_layer_speed = 50%
+first_layer_temperature = 205
+g0 = 0
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 
+infill_speed = 60
+layer_gcode = 
+layer_height = 0.25
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 4
+min_skirt_length = 0
+notes = 
+nozzle_diameter = 0.5
+only_retract_when_crossing_perimeters = 
+output_filename_format = [input_filename_base].gcode
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 100%
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_center = 100,100
+raft_layers = 0
+randomize_start = 0
+resolution = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 2
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+rotate = 0
+scale = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 4
+slowdown_below_layer_time = 30
+small_perimeter_speed = 30
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
+spiral_vase = 0
+start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle
+support_material = 
+support_material_angle = 0
+support_material_enforce_layers = 1
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+temperature = 195
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 100%
+top_solid_infill_speed = 40
+top_solid_layers = 5
+travel_speed = 130
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 1
+z_offset = -0.4
diff --git a/lib/dice.scad b/lib/dice.scad
new file mode 100644
index 0000000..c3cab85
--- /dev/null
+++ b/lib/dice.scad
@@ -0,0 +1,20 @@
+module d6(side=false, size=false) {
+    l = side ? side : size;
+    if (l == false) {
+        echo("ERROR: d6: one of side or size should be defined");
+    }
+    echo(l);
+    difference() {
+        intersection() {
+            cube(l, center=true);
+            sphere(l*0.79);
+        }
+        translate([0, 0, l/2]) child(0);
+        rotate([90, 0, 0]) translate([0, 0, l/2]) child(1);
+        rotate([0, 90, 0]) translate([0, 0, l/2]) child(2);
+        rotate([-90, 0, 0]) translate([0, 0, l/2]) child(3);
+        rotate([0, -90, 0]) translate([0, 0, l/2]) child(4);
+        rotate([180, 0, 0]) translate([0, 0, l/2]) child(5);
+    }
+}
+
diff --git a/lib/faces/empty.scad b/lib/faces/empty.scad
new file mode 100644
index 0000000..8725dee
--- /dev/null
+++ b/lib/faces/empty.scad
@@ -0,0 +1,4 @@
+
+module empty(l) {
+    translate([0, 0, 10]) sphere(1);
+}