diff options
Diffstat (limited to 'BootLoaderHID/makefile')
| -rw-r--r-- | BootLoaderHID/makefile | 51 |
1 files changed, 51 insertions, 0 deletions
diff --git a/BootLoaderHID/makefile b/BootLoaderHID/makefile new file mode 100644 index 0000000..6fe7881 --- /dev/null +++ b/BootLoaderHID/makefile @@ -0,0 +1,51 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2015. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# +# -------------------------------------- +# LUFA Project Makefile. +# -------------------------------------- + +# Run "make help" for target help. + +MCU = atmega32u4 +ARCH = AVR8 +BOARD = OLIMEX32U4 +F_CPU = 16000000 +F_USB = $(F_CPU) +OPTIMIZATION = s +TARGET = BootloaderHID +SRC = $(TARGET).c Descriptors.c $(LUFA_SRC_USB) +LUFA_PATH = ../lufa-LUFA-151115/LUFA +CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ +LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) + +# Flash size and bootloader section sizes of the target, in KB. These must +# match the target's total FLASH size and the bootloader size set in the +# device's fuses. +FLASH_SIZE_KB := 32 +BOOT_SECTION_SIZE_KB := 4 + +# Bootloader address calculation formulas +# Do not modify these macros, but rather modify the dependent values above. +CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) ) +BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 ) +BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) ) + +# Default target +all: + +# Include LUFA build script makefiles +include $(LUFA_PATH)/Build/lufa_core.mk +include $(LUFA_PATH)/Build/lufa_sources.mk +include $(LUFA_PATH)/Build/lufa_build.mk +include $(LUFA_PATH)/Build/lufa_cppcheck.mk +include $(LUFA_PATH)/Build/lufa_doxygen.mk +include $(LUFA_PATH)/Build/lufa_avrdude.mk +include $(LUFA_PATH)/Build/lufa_atprogram.mk + +#install: +#avrdude -V -pm32u4 -cstk500v2 -P/dev/ttyACM0 -Uflash:w:../BootLoaderHID/BootloaderHID.hex:a -U hfuse:w:0xD8:m -U efuse:w:0xC7:m -U lock:w:0xCF:m |