diff options
Diffstat (limited to 'source/historical_womenswear')
-rw-r--r-- | source/historical_womenswear/jackets/1880s_sportswear_jacket/index.rst | 74 | ||||
-rw-r--r-- | source/historical_womenswear/jackets/index.rst | 10 |
2 files changed, 84 insertions, 0 deletions
diff --git a/source/historical_womenswear/jackets/1880s_sportswear_jacket/index.rst b/source/historical_womenswear/jackets/1880s_sportswear_jacket/index.rst new file mode 100644 index 0000000..20e4efe --- /dev/null +++ b/source/historical_womenswear/jackets/1880s_sportswear_jacket/index.rst @@ -0,0 +1,74 @@ +1880s Sportswear Jacket +======================= + +.. figure:: jacket.jpg + :align: center + + + +The drafting manual I've used for this jacket, :cite:`1892:cutters`, is +from 1892, but tends to show shapes more typical of the natural form and +second bustle eras + +Most of the jacket is sewn by machine with just straight stitches (so an +historical threadle or hand cranked machine could be used), with few +handstitched finishing seams. Handstitching the full jacket is also an +option, if you don't have a machine: in that case use either a +backstitch or running backstitch on all machine sewn seams. + +Note that this isn't a full pattern: there is a drafted block (or you +can use a similarly shaped one you already have) and there are +instructions on how to develop and then sew the jacket from that. + +Inspiratons +----------- + +* :cite:`1892:cutters`, Fig. 15, The BeatricePlate 5a. + + +Materials +--------- + +Fabric +^^^^^^ + +* About 2 m of fashion fabric (at least 140 cm wide): mid-weight cotton, + linen or wool; +* about 2 m of lining fabric : light weight cotton or linen; + + +Notions +^^^^^^^ + +* sewing thread to match the fabric; + +Pattern +------- + +Measurements +^^^^^^^^^^^^ + +the file :download:`measurements.vit` is used by default by the pattern file +and has the list of needed measurements. + +Pattern +^^^^^^^ + +Get the valentina file for the pattern, +:download:`ladies_jacket.val`. + +You also need to decide the following measurements and set them in the +table of variables in Valentina; most defaults in the file are sensible. + + +Instructions +------------ + +Cutting +^^^^^^^ + +Gallery +------- + +.. figure:: full_skirt_back.jpg + :align: center diff --git a/source/historical_womenswear/jackets/index.rst b/source/historical_womenswear/jackets/index.rst new file mode 100644 index 0000000..5b1f616 --- /dev/null +++ b/source/historical_womenswear/jackets/index.rst @@ -0,0 +1,10 @@ +********* + Jackets +********* + +.. toctree:: + :maxdepth: 2 + :caption: Contents: + + 1880s_sportswear_jacket/index + |