diff options
| -rw-r--r-- | source/accessories/bags/roll_top_backpack/index.rst | 16 |
1 files changed, 15 insertions, 1 deletions
diff --git a/source/accessories/bags/roll_top_backpack/index.rst b/source/accessories/bags/roll_top_backpack/index.rst index 44f4b39..c275559 100644 --- a/source/accessories/bags/roll_top_backpack/index.rst +++ b/source/accessories/bags/roll_top_backpack/index.rst @@ -66,11 +66,25 @@ a single strap of double thickness. Sew the webbing pieces to the allowance at the top of the bottom back piece, at 4 cm from the center. -Cut a piece of 25 mm webbing, 60 cm long, sew it to the allowance at the +Cut a piece of 25 mm webbing, 70 cm long, sew it to the allowance at the top of the bottom back piece, right at the center. [cut 25 mm webbing for the lower part of the shoulder straps, TBD] +Cut two pieces of 25 mm webbing, 70 cm long, put them on each strap +support so that one edge goes from one corner to the middle of the long +side and there are 5 cm of webbing beyond the long side. + +Fold the strap support in half, right sides facing, and sew at 1 cm from +the long edge. + +Turn inside out, topstitch all around the webbing. + +Put the strap support on top of the bottom back, 5 cm from the bottom, +with the webbing facing up, and sew in the allowance. + +Trim the excess webbing. + Right sides together, put the top back piece over the bottom back and sew. Press the allowances up. |