diff options
| -rw-r--r-- | source/accessories/bags/modular_front_pack/index.rst | 45 |
1 files changed, 23 insertions, 22 deletions
diff --git a/source/accessories/bags/modular_front_pack/index.rst b/source/accessories/bags/modular_front_pack/index.rst index 9656ad3..b78b2be 100644 --- a/source/accessories/bags/modular_front_pack/index.rst +++ b/source/accessories/bags/modular_front_pack/index.rst @@ -121,6 +121,28 @@ right side of the back panel lining with a pleat at the center bottom, sew all around with a seaming allowance of 1.5 cm, backticking over the elastic. +Shoulder straps +^^^^^^^^^^^^^^^ + +Sew two pieces of webbing 45 cm long to the sewing allowance at the top +of the back panel, aligned with the MOLLE pattern. + +Cut two pieces of webbing 70 cm long, seal their edges. + +Put one end on the right side of one small triangle of fabric, so that +one edge goes from one corner to the middle of the long side, and there +are 5 cm of webbing beyond the long side. + +Fold the triangle in half, right sides facing, and sew 2 cm from the +long edge. + +Turn the triangle inside out, topstitch near the edges of the webbing. + +Sew the lower strap triangles to the bottom of the sides of the back +panel, just above the rounded off corner with a 1.5 cm allowance. + +Sew the handle centered to the top of the back panel. + Sides and Zipper ^^^^^^^^^^^^^^^^ @@ -153,26 +175,6 @@ front panel, sew all around the edges. Sandwitch the rigid padding between the lining (including the pocket) and the fabric of the back panel, sew all around the edges. -Shoulder straps -^^^^^^^^^^^^^^^ - -Sew two pieces of webbing 45 cm long to the sewing allowance at the top -of the back panel, aligned with the MOLLE pattern. - -Cut two pieces of webbing 70 cm long, seal their edges. - -Put one end on the right side of one small triangle of fabric, so that -one edge goes from one corner to the middle of the long side, and there -are 5 cm of webbing beyond the long side. - -Fold the triangle in half, right sides facing, and sew 2.5 cm from the -long edge. - -Turn the triangle inside out, topstitch near the edges of the webbing. - -Sew the lower strap triangles to the bottom of the sides of the back -panel, just above the rounded off corner with a 1.5 cm allowance. - Assemble the backpack ^^^^^^^^^^^^^^^^^^^^^ @@ -180,8 +182,7 @@ Place the bottom panel on the top/side panel, right (fabric) sides facing, sew on both short edges. Note that the zipper will have a narrower seam allowance than the bottom panel. -Press the raw edges towards the -bottom and bind them with twill webbing. +Press the raw edges towards the bottom and bind them with twill webbing. Place the right (fabric) side of the top/bottom/sides on the right side of the back, sew all around. You may have to clip the raw edges near the |