Some initial pictures for the shirt

4 files changed, 15 insertions, 2 deletions

diff --git a/source/historical_menswear/shirts/1880_shirt/01-cutting_tongue.jpg b/source/historical_menswear/shirts/1880_shirt/01-cutting_tongue.jpg
new file mode 100644
index 0000000..7ed578f
--- /dev/null
+++ b/source/historical_menswear/shirts/1880_shirt/01-cutting_tongue.jpg
diff --git a/source/historical_menswear/shirts/1880_shirt/02-sewn_collar.jpg b/source/historical_menswear/shirts/1880_shirt/02-sewn_collar.jpg
new file mode 100644
index 0000000..9e68e79
--- /dev/null
+++ b/source/historical_menswear/shirts/1880_shirt/02-sewn_collar.jpg
diff --git a/source/historical_menswear/shirts/1880_shirt/03-pressing_seams_collar.jpg b/source/historical_menswear/shirts/1880_shirt/03-pressing_seams_collar.jpg
new file mode 100644
index 0000000..3a72cb8
--- /dev/null
+++ b/source/historical_menswear/shirts/1880_shirt/03-pressing_seams_collar.jpg
diff --git a/source/historical_menswear/shirts/1880_shirt/index.rst b/source/historical_menswear/shirts/1880_shirt/index.rst
index 300080b..6b81271 100644
--- a/source/historical_menswear/shirts/1880_shirt/index.rst
+++ b/source/historical_menswear/shirts/1880_shirt/index.rst
@@ -226,12 +226,19 @@ complete the trapezium. Note that because of the sewing allowances this
 won't be a precise match, but the tolerance in this pattern is enough
 for it not to be a problem.
 
-.. figure:: sleeve_cutting_pattern_directional.svg
+.. figure:: sleeve_cutting_pattern-directional.svg
    :align: center
 
 If the fabric is directional or simply has a defined right and wrong
 side, you probably need to cut gussets from the wrist side of both sides
-of the sleeves and sew them to the shoulder sides.
+of the sleeves and sew them to the shoulder sides, as in the above
+schematic.
+
+.. figure:: 01-cutting_tongue.jpg
+   :align: center
+
+   The tongue can be cut from one of the small scraps that remain when
+   cutting the shoulder piece.
 
 Cut four of the shoulder pieces, two of the front bands, two of each
 collar piece, four of each cuff piece and two of the tongue.
@@ -246,9 +253,15 @@ reinforcement patches.
 Collar and Cuffs
 ^^^^^^^^^^^^^^^^
 
+.. figure:: 02-sewn_collar.jpg
+   :align: center
+
 Put the collar band pieces right sides together, backstitch the sides
 and top, leaving the bottom free to attach it to the shirt.
 
+.. figure:: 03-pressing_seams_collar.jpg
+   :align: center
+
 Press the seam, clip the corners, turn inside out and press.
 
 .. note::