diff options
Diffstat (limited to 'source/bookbinding/cartonnage/ink_drawers/index.rst')
| -rw-r--r-- | source/bookbinding/cartonnage/ink_drawers/index.rst | 70 |
1 files changed, 68 insertions, 2 deletions
diff --git a/source/bookbinding/cartonnage/ink_drawers/index.rst b/source/bookbinding/cartonnage/ink_drawers/index.rst index 39ddde9..cf86977 100644 --- a/source/bookbinding/cartonnage/ink_drawers/index.rst +++ b/source/bookbinding/cartonnage/ink_drawers/index.rst @@ -47,8 +47,74 @@ and the following tools: Pattern ------- -For each drawer you will need - +Board +^^^^^ + +All the pieces are cut from 2 mm board except for the structure plates. + +For each drawer you will need a base, 95 mm × 95 mm, and two fronts and +two sides that depend on the height of the drawer. + ++--------+---------------+---------------+---------------+ +| height | base (×1) | fronts (×2) | sides (×2) | ++========+===============+===============+===============+ +| 68 mm | 95 mm × 95 mm | 95 mm × 65 mm | 91 mm × 65 mm | ++--------+---------------+---------------+---------------+ +| 54 mm | 95 mm × 95 mm | 95 mm × 51 mm | 91 mm × 51 mm | ++--------+---------------+---------------+---------------+ +| 33 mm | 95 mm × 95 mm | 95 mm × 30 mm | 91 mm × 30 mm | ++--------+---------------+---------------+---------------+ +| 26 mm | 95 mm × 95 mm | 95 mm × 23 mm | 91 mm × 23 mm | ++--------+---------------+---------------+---------------+ +| 12 mm | 95 mm × 95 mm | 95 mm × 9 mm | 91 mm × 9 mm | ++--------+---------------+---------------+---------------+ + +For the structure you will need as many 100 mm × 100 mm bases as the number +of drawers minus two, as well as two sides and one back for each drawer. + ++--------+---------------+----------------+ +| height | back (×1) | sides (×2) | ++========+===============+================+ +| 68 mm | 96 mm × 68 mm | 100 mm × 68 mm | ++--------+---------------+----------------+ +| 54 mm | 96 mm × 54 mm | 100 mm × 54 mm | ++--------+---------------+----------------+ +| 33 mm | 96 mm × 33 mm | 100 mm × 33 mm | ++--------+---------------+----------------+ +| 26 mm | 96 mm × 26 mm | 100 mm × 26 mm | ++--------+---------------+----------------+ +| 12 mm | 96 mm × 12 mm | 100 mm × 12 mm | ++--------+---------------+----------------+ + +Plus two plates, 200 mm × 100 mm in 3 mm board. + +Thin board +^^^^^^^^^^ + +From the thin, <= 1 mm board, cut a set of suitable dividers for each +drawer from the following patterns: + +:download:`separators_55.svg` + 55 mm tall separators, suitable for 68 mm drawers; +:download:`separators_45.svg` + 45 mm tall separators, suitable for 54 mm drawers; +:download:`separators_20.svg` + 20 mm tall separators, suitable for 33 mm drawers; +:download:`separators_15.svg` + 15 mm tall separators, suitable for 26 mm drawers; +:download:`separators_20-9.svg` + 20 mm tall separators, just 9 slots instead of 16. + +Cloth +^^^^^ + +Paper +^^^^^ + +Ribbon +^^^^^^ + +For each drawer you need 50 mm of ribbon. Instructions ------------ |