diff options
| -rw-r--r-- | conf/coins.ini | 2 | ||||
| -rw-r--r-- | conf/dice.ini | 2 | ||||
| -rw-r--r-- | conf/pawns.ini | 114 | ||||
| -rw-r--r-- | conf/pyramids.ini | 6 | ||||
| -rw-r--r-- | conf/tiles.ini | 2 |
5 files changed, 120 insertions, 6 deletions
diff --git a/conf/coins.ini b/conf/coins.ini index 210d59d..ffda32d 100644 --- a/conf/coins.ini +++ b/conf/coins.ini @@ -101,7 +101,7 @@ support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_threshold = 0 -temperature = 205 +temperature = 185 threads = 2 toolchange_gcode = top_infill_extrusion_width = 150% diff --git a/conf/dice.ini b/conf/dice.ini index 37b5a65..e89e3f1 100644 --- a/conf/dice.ini +++ b/conf/dice.ini @@ -101,7 +101,7 @@ support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_threshold = 0 -temperature = 205 +temperature = 185 threads = 2 toolchange_gcode = top_infill_extrusion_width = 170% diff --git a/conf/pawns.ini b/conf/pawns.ini new file mode 100644 index 0000000..73f4966 --- /dev/null +++ b/conf/pawns.ini @@ -0,0 +1,114 @@ +# generated by Slic3r 0.9.10b on Fri Dec 6 12:45:52 2013 +avoid_crossing_perimeters = 1 +bed_size = 200,200 +bed_temperature = 0 +bottom_solid_layers = 3 +bridge_acceleration = 0 +bridge_fan_speed = 100 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_width = 0 +complete_objects = 1 +cooling = 1 +default_acceleration = 0 +disable_fan_first_layers = 1 +duplicate = 1 +duplicate_distance = 6 +duplicate_grid = 1,1 +end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors +external_perimeter_speed = 70% +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 40 +extruder_clearance_radius = 40 +extruder_offset = 0x0 +extrusion_axis = E +extrusion_multiplier = 1 +extrusion_width = 0 +fan_always_on = 0 +fan_below_layer_time = 60 +filament_diameter = 3 +fill_angle = 45 +fill_density = 0.45 +fill_pattern = rectilinear +first_layer_bed_temperature = 0 +first_layer_extrusion_width = 200% +first_layer_height = 0.25 +first_layer_speed = 50% +first_layer_temperature = 205 +g0 = 0 +gap_fill_speed = 20 +gcode_arcs = 0 +gcode_comments = 0 +gcode_flavor = reprap +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_speed = 60 +layer_gcode = +layer_height = 0.25 +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 10 +min_skirt_length = 0 +notes = +nozzle_diameter = 0.5 +only_retract_when_crossing_perimeters = 1 +output_filename_format = [input_filename_base].gcode +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 150% +perimeter_speed = 30 +perimeters = 3 +post_process = +print_center = 100,100 +raft_layers = 0 +randomize_start = 0 +resolution = 0 +retract_before_travel = 2 +retract_layer_change = 1 +retract_length = 1 +retract_length_toolchange = 10 +retract_lift = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 30 +rotate = 0 +scale = 1 +skirt_distance = 6 +skirt_height = 1 +skirts = 4 +slowdown_below_layer_time = 30 +small_perimeter_speed = 30 +solid_fill_pattern = concentric +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extrusion_width = 0 +solid_infill_speed = 60 +spiral_vase = 0 +start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle +support_material = +support_material_angle = 0 +support_material_enforce_layers = 1 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_layers = 0 +support_material_interface_spacing = 0 +support_material_pattern = rectilinear +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_threshold = 0 +temperature = 185 +threads = 2 +toolchange_gcode = +top_infill_extrusion_width = 150% +top_solid_infill_speed = 50 +top_solid_layers = 5 +travel_speed = 130 +use_relative_e_distances = 0 +vibration_limit = 0 +wipe = 0 +z_offset = -0.4 diff --git a/conf/pyramids.ini b/conf/pyramids.ini index bdbba8d..397e5f2 100644 --- a/conf/pyramids.ini +++ b/conf/pyramids.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 0.9.10b on Wed Mar 5 09:00:29 2014 +# generated by Slic3r 0.9.10b on Thu Mar 6 20:35:30 2014 avoid_crossing_perimeters = 1 bed_size = 200,200 bed_temperature = 0 @@ -52,7 +52,7 @@ layer_gcode = layer_height = 0.20 max_fan_speed = 100 min_fan_speed = 35 -min_print_speed = 10 +min_print_speed = 4 min_skirt_length = 0 notes = nozzle_diameter = 0.5 @@ -101,7 +101,7 @@ support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_threshold = 0 -temperature = 205 +temperature = 185 threads = 2 toolchange_gcode = top_infill_extrusion_width = 170% diff --git a/conf/tiles.ini b/conf/tiles.ini index b096d5d..762d2cc 100644 --- a/conf/tiles.ini +++ b/conf/tiles.ini @@ -101,7 +101,7 @@ support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 60 support_material_threshold = 0 -temperature = 205 +temperature = 185 threads = 2 toolchange_gcode = top_infill_extrusion_width = 170% |