From 77b9bcf22cc036f71ad5e0d51d3a452c69a10ff5 Mon Sep 17 00:00:00 2001 From: d3v1c3nv11 Date: Mon, 6 Nov 2017 13:25:24 +0200 Subject: Add files via upload --- TERES-HID/Config/LUFAConfig.h | 126 ++ TERES-HID/Descriptors.c | 301 ++++ TERES-HID/Descriptors.h | 126 ++ TERES-HID/KeyboardMouse.c | 963 +++++++++++ TERES-HID/KeyboardMouse.h | 200 +++ TERES-HID/KeyboardMouse.txt | 81 + TERES-HID/asf.xml | 62 + TERES-HID/doxyfile | 2395 +++++++++++++++++++++++++++ TERES-HID/hid_bootloader_cli | Bin 0 -> 14568 bytes TERES-HID/makefile | 44 + TERES-HID/running.config | 3659 +++++++++++++++++++++++++++++++++++++++++ TERES-HID/update | 1 + 12 files changed, 7958 insertions(+) create mode 100644 TERES-HID/Config/LUFAConfig.h create mode 100644 TERES-HID/Descriptors.c create mode 100644 TERES-HID/Descriptors.h create mode 100644 TERES-HID/KeyboardMouse.c create mode 100644 TERES-HID/KeyboardMouse.h create mode 100644 TERES-HID/KeyboardMouse.txt create mode 100644 TERES-HID/asf.xml create mode 100644 TERES-HID/doxyfile create mode 100644 TERES-HID/hid_bootloader_cli create mode 100644 TERES-HID/makefile create mode 100644 TERES-HID/running.config create mode 100644 TERES-HID/update diff --git a/TERES-HID/Config/LUFAConfig.h b/TERES-HID/Config/LUFAConfig.h new file mode 100644 index 0000000..151bea9 --- /dev/null +++ b/TERES-HID/Config/LUFAConfig.h @@ -0,0 +1,126 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2015. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2015 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ +// #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE +// #define INTERRUPT_CONTROL_ENDPOINT +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #elif (ARCH == ARCH_XMEGA) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH) +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT +// #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ +// #define USE_RAM_DESCRIPTORS + #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS +// #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 +// #define DEVICE_STATE_AS_GPIOR {Insert Value Here} + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define MAX_ENDPOINT_INDEX 3 +// #define NO_DEVICE_REMOTE_WAKEUP +// #define NO_DEVICE_SELF_POWER + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/TERES-HID/Descriptors.c b/TERES-HID/Descriptors.c new file mode 100644 index 0000000..bb91baf --- /dev/null +++ b/TERES-HID/Descriptors.c @@ -0,0 +1,301 @@ +/* + This software is based on the LUFA library. Modifications of the + software are released under GPL but LUFA library itself is copyrigthed + by its creator Dean Camera. Refer to the license below on the usage of + LUFA library. + + Chris Boudacoff @ Olimex Ltd + chris protonic co uk +*/ + + +/* + LUFA Library + Copyright (C) Dean Camera, 2015. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2015 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * computer-readable structures which the host requests upon device enumeration, to determine + * the device's capabilities and functions. + */ + +#include "Descriptors.h" + + +/** HID class report descriptor. This is a special descriptor constructed with values from the + * USBIF HID class specification to describe the reports and capabilities of the HID device. This + * descriptor is parsed by the host and its contents used to determine what data (and in what encoding) + * the device will send, and what it may be sent back from the host. Refer to the HID specification for + * more details on HID report descriptors. + * + * This descriptor describes the mouse HID interface's report structure. + */ +const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] = +{ + /* Use the HID class driver's standard Mouse report. + * Min X/Y Axis values: -1 + * Max X/Y Axis values: 1 + * Min physical X/Y Axis values (used to determine resolution): -1 + * Max physical X/Y Axis values (used to determine resolution): 1 + * Buttons: 3 + * Absolute screen coordinates: false + */ + HID_DESCRIPTOR_MOUSE(-100, 100, -100,100, 3, false) +}; + +/** Same as the MouseReport structure, but defines the keyboard HID interface's report structure. */ +const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] = +{ + /* Use the HID class driver's standard Keyboard report. + * Max simultaneous keys: 6 + */ + HID_DESCRIPTOR_KEYBOARD(6) +}; + +/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall + * device characteristics, including the supported USB version, control endpoint size and the + * number of device configurations. The descriptor is read out by the USB host when the enumeration + * process begins. + */ +const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = +{ + .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, + + .USBSpecification = VERSION_BCD(1,1,0), + .Class = USB_CSCP_NoDeviceClass, + .SubClass = USB_CSCP_NoDeviceSubclass, + .Protocol = USB_CSCP_NoDeviceProtocol, + + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, + + .VendorID = 0x15ba, //Vendor: Olimex Ltd. + .ProductID = 0x003c, + .ReleaseNumber = VERSION_BCD(0, 0, 1), + + .ManufacturerStrIndex = STRING_ID_Manufacturer, + .ProductStrIndex = STRING_ID_Product, + .SerialNumStrIndex = USE_INTERNAL_SERIAL, + + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS +}; + +/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage + * of the device in one of its supported configurations, including information about any device interfaces + * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting + * a configuration so that the host may correctly communicate with the USB device. + */ +const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = +{ + .Config = + { + .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, + + .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), + .TotalInterfaces = 2, + .ConfigurationNumber = 1, + .ConfigurationStrIndex = NO_DESCRIPTOR, + + .ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_SELFPOWERED), + + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) + }, + .HID1_KeyboardInterface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = INTERFACE_ID_Keyboard, + .AlternateSetting = 0x00, + + .TotalEndpoints = 1, + + .Class = HID_CSCP_HIDClass, + .SubClass = HID_CSCP_BootSubclass, + .Protocol = HID_CSCP_KeyboardBootProtocol, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .HID1_KeyboardHID = + { + .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, + + .HIDSpec = VERSION_BCD(1,1,1), + .CountryCode = 0x00, + .TotalReportDescriptors = 1, + .HIDReportType = HID_DTYPE_Report, + .HIDReportLength = sizeof(KeyboardReport) + }, + + .HID1_ReportINEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = KEYBOARD_IN_EPADDR, + .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = HID_EPSIZE, + .PollingIntervalMS = 0x05 + }, + + .HID2_MouseInterface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = INTERFACE_ID_Mouse, + .AlternateSetting = 0x00, + + .TotalEndpoints = 1, + + .Class = HID_CSCP_HIDClass, + .SubClass = HID_CSCP_BootSubclass, + .Protocol = HID_CSCP_MouseBootProtocol, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .HID2_MouseHID = + { + .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, + + .HIDSpec = VERSION_BCD(1,1,1), + .CountryCode = 0x00, + .TotalReportDescriptors = 1, + .HIDReportType = HID_DTYPE_Report, + .HIDReportLength = sizeof(MouseReport) + }, + + .HID2_ReportINEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = MOUSE_IN_EPADDR, + .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = HID_EPSIZE, + .PollingIntervalMS = 0x05 + } +}; + +/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests + * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate + * via the language ID table available at USB.org what languages the device supports for its string descriptors. + */ +const USB_Descriptor_String_t PROGMEM LanguageString = USB_STRING_DESCRIPTOR_ARRAY(LANGUAGE_ID_ENG); + +/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable + * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t PROGMEM ManufacturerString = + USB_STRING_DESCRIPTOR(L"Olimex Ltd."); + +/** Product descriptor string. This is a Unicode string containing the product's details in human readable form, + * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device + * Descriptor. + */ +const USB_Descriptor_String_t PROGMEM ProductString = USB_STRING_DESCRIPTOR( + L"TERES Keyboard+Touchpad"); + +/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" + * documentation) by the application code so that the address and size of a requested descriptor can be given + * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function + * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the + * USB host. + */ +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + const void** const DescriptorAddress) +{ + const uint8_t DescriptorType = (wValue >> 8); + const uint8_t DescriptorNumber = (wValue & 0xFF); + + const void* Address = NULL; + uint16_t Size = NO_DESCRIPTOR; + + switch (DescriptorType) + { + case DTYPE_Device: + Address = &DeviceDescriptor; + Size = sizeof(USB_Descriptor_Device_t); + break; + case DTYPE_Configuration: + Address = &ConfigurationDescriptor; + Size = sizeof(USB_Descriptor_Configuration_t); + break; + case DTYPE_String: + switch (DescriptorNumber) + { + case STRING_ID_Language: + Address = &LanguageString; + Size = pgm_read_byte(&LanguageString.Header.Size); + break; + case STRING_ID_Manufacturer: + Address = &ManufacturerString; + Size = pgm_read_byte(&ManufacturerString.Header.Size); + break; + case STRING_ID_Product: + Address = &ProductString; + Size = pgm_read_byte(&ProductString.Header.Size); + break; + } + + break; + case HID_DTYPE_HID: + switch (wIndex) + { + case INTERFACE_ID_Keyboard: + Address = &ConfigurationDescriptor.HID1_KeyboardHID; + Size = sizeof(USB_HID_Descriptor_HID_t); + break; + case INTERFACE_ID_Mouse: + Address = &ConfigurationDescriptor.HID2_MouseHID; + Size = sizeof(USB_HID_Descriptor_HID_t); + break; + } + + break; + case HID_DTYPE_Report: + switch (wIndex) + { + case INTERFACE_ID_Keyboard: + Address = &KeyboardReport; + Size = sizeof(KeyboardReport); + break; + case INTERFACE_ID_Mouse: + Address = &MouseReport; + Size = sizeof(MouseReport); + break; + } + + break; + } + + *DescriptorAddress = Address; + return Size; +} + diff --git a/TERES-HID/Descriptors.h b/TERES-HID/Descriptors.h new file mode 100644 index 0000000..92331fa --- /dev/null +++ b/TERES-HID/Descriptors.h @@ -0,0 +1,126 @@ +/* + This software is based on the LUFA library. Modifications of the + software are released under GPL but LUFA library itself is copyrigthed + by its creator Dean Camera. Refer to the license below on the usage of + LUFA library. + + Chris Boudacoff @ Olimex Ltd + chris protonic co uk +*/ + + +/* + LUFA Library + Copyright (C) Dean Camera, 2015. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2015 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Descriptors.c. + */ + +#ifndef _DESCRIPTORS_H_ +#define _DESCRIPTORS_H_ + + + /* Includes: */ + #include + + #include + + /* Type Defines: */ + /** Type define for the device configuration descriptor structure. This must be defined in the + * application code, as the configuration descriptor contains several sub-descriptors which + * vary between devices, and which describe the device's usage to the host. + */ + typedef struct + { + USB_Descriptor_Configuration_Header_t Config; + + // Keyboard HID Interface + USB_Descriptor_Interface_t HID1_KeyboardInterface; + USB_HID_Descriptor_HID_t HID1_KeyboardHID; + USB_Descriptor_Endpoint_t HID1_ReportINEndpoint; + + // Mouse HID Interface + USB_Descriptor_Interface_t HID2_MouseInterface; + USB_HID_Descriptor_HID_t HID2_MouseHID; + USB_Descriptor_Endpoint_t HID2_ReportINEndpoint; + } USB_Descriptor_Configuration_t; + + /** Enum for the device interface descriptor IDs within the device. Each interface descriptor + * should have a unique ID index associated with it, which can be used to refer to the + * interface from other descriptors. + */ + enum InterfaceDescriptors_t + { + + INTERFACE_ID_Keyboard = 0, /**< Keyboard interface descriptor ID */ + INTERFACE_ID_Mouse = 1, /**< Mouse interface descriptor ID */ + + + + }; + + /** Enum for the device string descriptor IDs within the device. Each string descriptor should + * have a unique ID index associated with it, which can be used to refer to the string from + * other descriptors. + */ + enum StringDescriptors_t + { + STRING_ID_Language = 0, /**< Supported Languages string descriptor ID (must be zero) */ + STRING_ID_Manufacturer = 1, /**< Manufacturer string ID */ + STRING_ID_Product = 2, /**< Product string ID */ + }; + + /* Macros: */ + + + /** Endpoint address of the Keyboard HID reporting IN endpoint. */ + #define KEYBOARD_IN_EPADDR (ENDPOINT_DIR_IN | 5) + + /** Endpoint address of the Mouse HID reporting IN endpoint. */ + #define MOUSE_IN_EPADDR (ENDPOINT_DIR_IN | 1) + + /** Size in bytes of each of the HID reporting IN endpoints. */ + #define HID_EPSIZE 8 + + /* Function Prototypes: */ + uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint8_t wIndex, + const void** const DescriptorAddress) + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); + typedef struct + { + uint8_t Button; + int8_t X; + int8_t Y; + int8_t Wheel; + } ATTR_PACKED USB_WheelMouseReport_Data_t; +#endif + diff --git a/TERES-HID/KeyboardMouse.c b/TERES-HID/KeyboardMouse.c new file mode 100644 index 0000000..416a59e --- /dev/null +++ b/TERES-HID/KeyboardMouse.c @@ -0,0 +1,963 @@ +/* + This software is based on the LUFA library. Modifications of the + software are released under GPL but LUFA library itself is copyrigthed + by its creator Dean Camera. Refer to the license below on the usage of + LUFA library. + + Chris Boudacoff @ Olimex Ltd + chris protonic co uk +*/ + +/* + LUFA Library + Copyright (C) Dean Camera, 2015. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2015 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the KeyboardMouse demo. This file contains the main tasks of + * the demo and is responsible for the initial application hardware configuration. + */ + +#include "KeyboardMouse.h" +/** Magic lock for forced application start. If the HWBE fuse is programmed and BOOTRST is unprogrammed, the bootloader + * will start if the /HWB line of the AVR is held low and the system is reset. However, if the /HWB line is still held + * low when the application attempts to start via a watchdog reset, the bootloader will re-start. If set to the value + * \ref MAGIC_BOOT_KEY the special init function \ref Application_Jump_Check() will force the application to start. + */ +uint16_t MagicBootKey ATTR_NO_INIT; + +/** Buffer to hold the previously generated Keyboard HID report, for comparison purposes inside the HID class driver. */ +static uint8_t PrevKeyboardHIDReportBuffer[sizeof(USB_KeyboardReport_Data_t)]; + +/** Buffer to hold the previously generated Mouse HID report, for comparison purposes inside the HID class driver. */ +static uint8_t PrevMouseHIDReportBuffer[sizeof(USB_WheelMouseReport_Data_t)]; + + +int limited(int value) +{ +if (value < 0) +{ + if (abs(value) > speedlimit) + return -speedlimit; + +} +else +{ + if (value > speedlimit) + return speedlimit; + + +} + +return value; + + +} + +/** LUFA HID Class driver interface configuration and state information. This structure is + * passed to all HID Class driver functions, so that multiple instances of the same class + * within a device can be differentiated from one another. This is for the keyboard HID + * interface within the device. + */ +USB_ClassInfo_HID_Device_t Keyboard_HID_Interface = + { + .Config = + { + .InterfaceNumber = INTERFACE_ID_Keyboard, + .ReportINEndpoint = + { + .Address = KEYBOARD_IN_EPADDR, + .Size = HID_EPSIZE, + .Banks = 1, + }, + .PrevReportINBuffer = PrevKeyboardHIDReportBuffer, + .PrevReportINBufferSize = sizeof(PrevKeyboardHIDReportBuffer), + }, + }; + +/** LUFA HID Class driver interface configuration and state information. This structure is + * passed to all HID Class driver functions, so that multiple instances of the same class + * within a device can be differentiated from one another. This is for the mouse HID + * interface within the device. + */ +USB_ClassInfo_HID_Device_t Mouse_HID_Interface = + { + .Config = + { + .InterfaceNumber = INTERFACE_ID_Mouse, + .ReportINEndpoint = + { + .Address = MOUSE_IN_EPADDR, + .Size = HID_EPSIZE, + .Banks = 1, + }, + .PrevReportINBuffer = PrevMouseHIDReportBuffer, + .PrevReportINBufferSize = sizeof(PrevMouseHIDReportBuffer), + }, + }; + + + void Jump_To_Bootloader(void) + { + // If USB is used, detach from the bus and reset it + USB_Disable(); + + // Disable all interrupts + cli(); + + // Wait one seconds for the USB detachment to register on the host + Delay_MS(1000); + + // Set the bootloader key to the magic value and force a reset + wdt_enable(WDTO_250MS); + for (;;); + } + +void tp_guarder(void) +{ + tp_guard=true; + tpguard=TP_LOCK; +} +/** Main program entry point. This routine contains the overall program flow, including initial + * setup of all components and the main program loop. + */ +int main(void) +{ + + + SetupHardware(); + GlobalInterruptEnable(); + + for (;;) + { + + + HID_Device_USBTask(&Keyboard_HID_Interface); + DDRE=0x00; + PORTE=0xff; + PORTB=0xfd; + DDRB=0xff; + HID_Device_USBTask(&Mouse_HID_Interface); + USB_USBTask(); + + if ((PINE & (1<<2)) == 0) + { + DDRB=0xff; + PORTB=0xfe; + Delay_MS(10); + if ((PINC & (1<<7)) == 0) + { + + + PORTB=0xbf; + Delay_MS(10); + if ((PIND & (1<<4)) == 0) + Jump_To_Bootloader(); + } + } + } +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +void SetupHardware() +{ +#if (ARCH == ARCH_AVR8) + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); +#elif (ARCH == ARCH_XMEGA) + /* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */ + XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU); + XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL); + + /* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */ + XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ); + XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB); + + PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm; +#endif + + /* Hardware Initialization */ + + //Keyboard init + DDRB = 0xff; + PORTB = 0xff; + + DDRD = 0; + PORTD = 0xfc; + + DDRC = 0; + PORTC = 0xc0; + + DDRE = 0; + PORTE = 0x44; + + DDRF = 0; + PORTF = 0xf2; + + + + TWI_Init(TWI_BIT_PRESCALE_4 , TWI_BITLENGTH_FROM_FREQ(TWI_BIT_PRESCALE_4 , 100000)); + ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128); + ADCSRA |= 1 << ADIE; + MCUCR = 0; + EIMSK |= 1 << INT2; + + ADC_SetupChannel(0); + ADC_StartReading(ADC_REFERENCE_AVCC | ADC_LEFT_ADJUSTED | ADC_CHANNEL0); + + // set timer0 counter initial value to 0 + TCNT0=0x00; + // start timer0 with /1024 prescaler + TCCR0B = (1<Modifier = 0; + +for (x=0;x<6;x++) +KeyboardReport->KeyCode[x]=0; + + +if (itsDone) +{ +// + +itsDone = false; +#if 0 + +switch (tpdata[2]) +{ +case 0: +KeyboardReport->KeyCode[0]=HID_KEYBOARD_SC_0_AND_CLOSING_PARENTHESIS; +break; +case 1: +KeyboardReport->KeyCode[0]=HID_KEYBOARD_SC_1_AND_EXCLAMATION; +break; +case 2: +KeyboardReport->KeyCode[0]=HID_KEYBOARD_SC_2_AND_AT; +break; +default: +KeyboardReport->KeyCode[0]=HID_KEYBOARD_SC_DOT_AND_GREATER_THAN_SIGN; +break; +} + +keyc = 1; + +#endif +} +DDRE=0; +DDRF=0; +DDRC=0; + DDRD = 0; + PORTD = 0xfc; +PORTE=0xFF; +PORTF=0xFF; +PORTC=0xFF; + + +DDRB = 0xff; + +for (colmn = 0; colmn<8; colmn++) +{ + +uint8_t keynow=0; + +if (colmn == 0) +{ +cli(); +DDRB=0x00; +PORTB=0x00; +DDRD = (1<<4); +PORTD = (1<<4); + +Delay_MS(2); + +if (PINB & 0x40) +{ + fn = 112; + //tp_guarder(); + if (PINB & 0x01) + { + KeyboardReport->KeyCode[keyc]=HID_KEYBOARD_SC_PAGE_UP; + if (keyc<5) keyc++; + } + if (PINB & 0x02) + { + KeyboardReport->Modifier |= HID_KEYBOARD_MODIFIER_LEFTSHIFT; + KeyboardReport->KeyCode[keyc]=HID_KEYBOARD_SC_LEFT_SHIFT; + if (keyc<5) keyc++; + + } + if (PINB & 0x20) + { + KeyboardReport->KeyCode[keyc]=HID_KEYBOARD_SC_HOME; + if (keyc<5) keyc++; + } + + if (PINB & 0x80) + { + KeyboardReport->Modifier |= HID_KEYBOARD_MODIFIER_RIGHTSHIFT; + KeyboardReport->KeyCode[keyc]=HID_KEYBOARD_SC_RIGHT_SHIFT; + if (keyc<5) keyc++; + } + + + +} +else +{ + + if (PINB & 0x01) + { + KeyboardReport->KeyCode[keyc]=HID_KEYBOARD_SC_UP_ARROW; + if (keyc<5) keyc++; + //tp_guarder(); + } + if (PINB & 0x02) + { + KeyboardReport->Modifier |= HID_KEYBOARD_MODIFIER_LEFTSHIFT; + KeyboardReport->KeyCode[keyc]=HID_KEYBOARD_SC_LEFT_SHIFT; + if (keyc<5) keyc++; + } + if (PINB & 0x20) + { + KeyboardReport->KeyCode[keyc]=HID_KEYBOARD_SC_LEFT_ARROW; + if (keyc<5) keyc++; + //tp_guarder(); + } + + if (PINB & 0x80) + { + KeyboardReport->Modifier |= HID_KEYBOARD_MODIFIER_RIGHTSHIFT; + KeyboardReport->KeyCode[keyc]=HID_KEYBOARD_SC_RIGHT_SHIFT; + if (keyc<5) keyc++; + } + + + +} + +//////x0 +DDRD = (1<<6); +PORTD = (1<<6); +DDRB=0x00; +PORTB=0x00; +Delay_MS(2); + +if (PINB & 0x10) +{ + KeyboardReport->Modifier |= HID_KEYBOARD_MODIFIER_RIGHTCTRL; + KeyboardReport->KeyCode[keyc]=HID_KEYBOARD_SC_RIGHT_CONTROL; + if (keyc<5) keyc++; + +} +if (PINB & 0x40) +{ + KeyboardReport->Modifier |= HID_KEYBOARD_MODIFIER_LEFTCTRL; + KeyboardReport->KeyCode[keyc]=HID_KEYBOARD_SC_LEFT_CONTROL; + if (keyc<5) keyc++; + +} +if (PINB & 0x08) +{ + if (fn==112) + KeyboardReport->KeyCode[keyc]=HID_KEYBOARD_SC_VOLUME_UP; + else + KeyboardReport->KeyCode[keyc]=HID_KEYBOARD_SC_F5; + if (keyc<5) keyc++; + +} + + +PORTB = rowY[colmn]; +DDRB = 0xff; + DDRD = 0; + PORTD = 0xfc; +Delay_MS(3); +sei(); +} + +PORTB = rowY[colmn]; +while (PINB != rowY[colmn]); + +x=1; + +if ((PINC & (1<<7)) == 0) +{ + //tp_guarder(); +keynow= keys[colmn*14+x+fn]; +KeyboardReport->Modifier |= keym[colmn*14+x]; +if (keynow!=0) +{ +KeyboardReport->KeyCode[keyc]=keys[colmn*14+x+fn]; +if (keyc<5) keyc++; +} +} +x++;//2 +if ((PINC & (1<<6)) == 0) +{ +// tp_guarder(); +keynow= keys[colmn*14+x+fn]; +KeyboardReport->Modifier |= keym[colmn*14+x]; +if (keynow!=0) +{ +KeyboardReport->KeyCode[keyc]=keynow; +if (keyc<5) keyc++; +} +} +x++;//3 +//Delay_MS(5); +if ((PIND & (1<<7))== 0) +{ +// tp_guarder(); +keynow= keys[colmn*14+x+fn]; +KeyboardReport->Modifier |= keym[colmn*14+x]; + + +if (keynow == HID_KEY_LOCK_TOUCHPAD) + { + TouchPadLocked=!TouchPadLocked; + while ((PIND & (1<<7))== 0); + } +if (keynow!=0) +{ +KeyboardReport->KeyCode[keyc]=keynow; +if (keyc<5) keyc++; +} +} +x++;//4 +//Delay_MS(5); +if ((PIND & (1<<3)) == 0) +{ +// tp_guarder(); +keynow= keys[colmn*14+x+fn]; +KeyboardReport->Modifier |= keym[colmn*14+x]; +if (keynow!=0) +{ +KeyboardReport->KeyCode[keyc]=keynow; +if (keyc<5) keyc++; +} +} +x++;//5 +if ((PINF & (1<<1)) == 0) +{ +// tp_guarder(); +keynow= keys[colmn*14+x+fn]; +KeyboardReport->Modifier |= keym[colmn*14+x]; +if (keynow!=0) +{ +KeyboardReport->KeyCode[keyc]=keynow; +if (keyc<5) keyc++; +} +} +x++;//6 +if ((PINF & (1<<6)) == 0) +{ +// tp_guarder(); +keynow= keys[colmn*14+x+fn]; +KeyboardReport->Modifier |= keym[colmn*14+x]; +if (keynow!=0) +{ +KeyboardReport->KeyCode[keyc]=keynow; +if (keyc<5) keyc++; +} +} +x++;//7 +if ((PINE & (1<<6)) == 0) +{ +// tp_guarder(); +keynow= keys[colmn*14+x+fn]; +KeyboardReport->Modifier |= keym[colmn*14+x]; +if (keynow!=0) +{ +KeyboardReport->KeyCode[keyc]=keynow; +if (keyc<5) keyc++; +} +} +x++;//8 +if ((PINF & (1<<4)) == 0) +{ +// tp_guarder(); +keynow= keys[colmn*14+x+fn]; +KeyboardReport->Modifier |= keym[colmn*14+x]; +if (keynow!=0) +{ +KeyboardReport->KeyCode[keyc]=keynow; +if (keyc<5) keyc++; +} +} +x++;//9 +if ((PIND & (1<<5)) == 0) +{ +// tp_guarder(); +keynow= keys[colmn*14+x+fn]; +KeyboardReport->Modifier |= keym[colmn*14+x]; +if (keynow!=0) +{ +KeyboardReport->KeyCode[keyc]=keynow; +if (keyc<5) keyc++; +} +} +x++;//10 +if ((PINF & (1<<5)) == 0) +{ +// tp_guarder(); +keynow= keys[colmn*14+x+fn]; +KeyboardReport->Modifier |= keym[colmn*14+x]; +if (keynow!=0) +{ +KeyboardReport->KeyCode[keyc]=keynow; +if (keyc<5) keyc++; +} +} + + +x++;//11 +if ((PINF & (1<<7)) == 0) +{ +// tp_guarder(); +keynow= keys[colmn*14+x+fn]; +KeyboardReport->Modifier |= keym[colmn*14+x]; +if (keynow!=0) +{ +KeyboardReport->KeyCode[keyc]=keynow; +if (keyc<5) keyc++; +} +} + + +x++;//12 +if ((PINE & (1<<2)) == 0) +{ +// tp_guarder(); +keynow= keys[colmn*14+x+fn]; +KeyboardReport->Modifier |= keym[colmn*14+x]; +if (keynow!=0) +{ +KeyboardReport->KeyCode[keyc]=keynow; +if (keyc<5) keyc++; + +} +} + DDRD = 0; + PORTD = 0xfc; + + +} + +if ((KeyboardReport->Modifier == 0) && (keyc!=0)) tp_guarder(); + + + *ReportSize = sizeof(USB_KeyboardReport_Data_t); + return true;//return false; + } +if (HIDInterfaceInfo == &Mouse_HID_Interface) + { + USB_WheelMouseReport_Data_t* MouseReport = (USB_WheelMouseReport_Data_t*)ReportData; + + + MR_Y = 0; + MR_X = 0; + MR_W = 0; + MR_B |= mouse;// (1 << 0); + +//cli(); +if (ActionSend) +{ +uint16_t posx1 = tpdata[3]<<8 | tpdata[4]; +uint16_t posy1 = tpdata[5]<<8 | tpdata[6]; +switch (tpdata[2]) +{ +case 0: + if (lastfingers != 0) + { + if (time_zero>PRETAP) + { + + if (time_pressed posy1 + DRAG_HYST) + MR_W = WHEEL; + else if (lastposY + DRAG_HYST < posy1) + MR_W = -WHEEL; + + if (MR_W !=0) time_zero = 0; + presstime=0; + } + else + { + + time_two = 0; + startposX=posx1; + startposY=posy1; + lastfingers = 2; + + } + lastposX = posx1; + lastposY = posy1; + + break; + + +default: + lastposX = 0; + lastposY = 0; + + break; + + +} +lastfingers = tpdata[2]; +ActionSend = false; +itsDone = true; +} + MouseReport->Y = MR_Y; + MouseReport->X = MR_X; + MouseReport->Button = MR_B; + MouseReport->Wheel = MR_W; + + MR_B=0; + + *ReportSize = sizeof(USB_WheelMouseReport_Data_t); + return true; + } +} + + + + +/** HID class driver callback function for the processing of HID reports from the host. + * + * \param[in] HIDInterfaceInfo Pointer to the HID class interface configuration structure being referenced + * \param[in] ReportID Report ID of the received report from the host + * \param[in] ReportType The type of report that the host has sent, either HID_REPORT_ITEM_Out or HID_REPORT_ITEM_Feature + * \param[in] ReportData Pointer to a buffer where the received report has been stored + * \param[in] ReportSize Size in bytes of the received HID report + */ +void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, + const uint8_t ReportID, + const uint8_t ReportType, + const void* ReportData, + const uint16_t ReportSize) +{ + if (HIDInterfaceInfo == &Keyboard_HID_Interface) + { + + } +} + +ISR(ADC_vect) +{ + + ADCSRA |= (1 << ADIF); + button= ADCH; + + + if (button == oldbutton) + { + if (button < 0xe8) + { + + if (button>0xa0) mouse = MOUSE_RIGTH; + + else if (button>0x80) mouse = MOUSE_LEFT; + + else mouse = MOUSE_MIDDLE; + + } + else mouse = 0; + } + else oldbutton = button; + +} + + + + + + +ISR(INT2_vect) +{ + #if 1 + if (TWI_StartTransmission(0x48 | TWI_ADDRESS_WRITE, 10) == TWI_ERROR_NoError) + { + TWI_SendByte(0x00); + TWI_StopTransmission(); + + if (TWI_StartTransmission(0x48 | TWI_ADDRESS_READ, 10) == TWI_ERROR_NoError) + { + + + // Read some bytes, acknowledge after the last byte is received???? + for (int s=0;s<0x06;s++) + TWI_ReceiveByte(&tpdata[s], false); + + + TWI_ReceiveByte(&tpdata[0x06], true); + + } + } + // Must stop transmission afterwards to release the bus + TWI_StopTransmission(); + +if ((!TouchPadLocked) && (!tp_guard)) + ActionSend = true; +#endif +} + +// timer0 overflow ~60hz +ISR(TIMER0_OVF_vect) { + +#if 1 + + + if (TWI_StartTransmission(0x48 | TWI_ADDRESS_WRITE, 10) == TWI_ERROR_NoError) + { + TWI_SendByte(0x00); + TWI_StopTransmission(); + + if (TWI_StartTransmission(0x48 | TWI_ADDRESS_READ, 10) == TWI_ERROR_NoError) + { + + + // Read some bytes, acknowledge after the last byte is received???? + for (int s=0;s<0x06;s++) + TWI_ReceiveByte(&tpdata[s], false); + + + TWI_ReceiveByte(&tpdata[0x06], true); + + } + } + // Must stop transmission afterwards to release the bus + TWI_StopTransmission(); + if ((!TouchPadLocked) && (!tp_guard) && (tpdata[0]!=0)) + ActionSend = true; + + + + + +#endif + + + if ((time_zero != 0xff) && (tpdata[2]==0)) time_zero++; + + if (time_zero==TOUCH_TO) + { +#if TAP_ENABLED + MR_B=MR_B_REQ; + MR_B_REQ=0; +#endif + time_one=0; + time_two=0; + time_pressed=0; + } + if ((time_one != 0xff) && (tpdata[2]==1)) time_one++; + if ((time_two != 0xff) && (tpdata[2]==2)) time_two++; + + + if (ticks!=0) ticks--; + if (dragtime!=0) dragtime--; + if (presstime != 0) presstime--; + if (tpguard !=0) tpguard--; + if (tpguard==1) tp_guard = false; + + + + if (touch_to!=0) touch_to--; + if (touch_to==1) + { + tap_enabled=true; + lastposX=0; + lastposY=0; + drag=false; + if (presstime!=0) + ActionSend = true; + else + lastfingers=0; + + } +} diff --git a/TERES-HID/KeyboardMouse.h b/TERES-HID/KeyboardMouse.h new file mode 100644 index 0000000..8d55dad --- /dev/null +++ b/TERES-HID/KeyboardMouse.h @@ -0,0 +1,200 @@ +/* + This software is based on the LUFA library. Modifications of the + software are released under GPL but LUFA library itself is copyrigthed + by its creator Dean Camera. Refer to the license below on the usage of + LUFA library. + + Chris Boudacoff @ Olimex Ltd + chris protonic co uk +*/ + +/* + LUFA Library + Copyright (C) Dean Camera, 2015. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2015 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + + +#ifndef _KEYBOARD_MOUSE_H_ +#define _KEYBOARD_MOUSE_H_ + + + /* Includes: */ + #include + #include + #include + #include + #include + #include + #include + #include + #include "Descriptors.h" + + #include + #include + #include + #include + #include + + /** Magic bootloader key to unlock forced application start mode. */ + #define MAGIC_BOOT_KEY 0xDC42 + +#define HID_KEY_WLAN 246 +#define HID_KEY_RFKILL 247 +#define HID_KEY_LOCK_TOUCHPAD 199 +#define HID_KEY_BRIGTHNESS_DOWN 0x6f +#define HID_KEY_BRIGTHNESS_UP 0x70 +#define HID_KEY_DISPLAY_SWITCH 0xe3 +#define HID_KEYBOARD_SC_LEFTMETA 0x7d +#define HID_KEYBOARD_SC_COMPOSE 0x7f + +#define HID_KEYBOARD_MODIFIER_LEFTSHIFT 0x02 +#define HID_KEYBOARD_MODIFIER_RIGHTSHIFT 0x20 + + +/** Bootloader special address to start the user application */ +#define COMMAND_STARTAPPLICATION 0xFFFF + + /* Function Prototypes: */ + void SetupHardware(void); + uint8_t M_Buttons(void); + void EVENT_USB_Device_Connect(void); + void EVENT_USB_Device_Disconnect(void); + void EVENT_USB_Device_ConfigurationChanged(void); + void EVENT_USB_Device_ControlRequest(void); + void EVENT_USB_Device_StartOfFrame(void); + void Read_TP(void); + bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, + uint8_t* const ReportID, + const uint8_t ReportType, + void* ReportData, + uint16_t* const ReportSize); + void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, + const uint8_t ReportID, + const uint8_t ReportType, + const void* ReportData, + const uint16_t ReportSize); + +const int keys[224] = {HID_KEYBOARD_SC_LEFT_CONTROL,HID_KEYBOARD_SC_GRAVE_ACCENT_AND_TILDE,HID_KEYBOARD_SC_F1,HID_KEYBOARD_SC_F2,HID_KEYBOARD_SC_5_AND_PERCENTAGE,HID_KEYBOARD_SC_6_AND_CARET,HID_KEYBOARD_SC_EQUAL_AND_PLUS,HID_KEYBOARD_SC_F8,HID_KEYBOARD_SC_MINUS_AND_UNDERSCORE,0,HID_KEYBOARD_SC_F9,HID_KEYBOARD_SC_DELETE,0,0, + 0,HID_KEYBOARD_SC_TAB,HID_KEYBOARD_SC_CAPS_LOCK,HID_KEYBOARD_SC_F3,HID_KEYBOARD_SC_T,HID_KEYBOARD_SC_Y,HID_KEYBOARD_SC_CLOSING_BRACKET_AND_CLOSING_BRACE,HID_KEYBOARD_SC_F7,HID_KEYBOARD_SC_OPENING_BRACKET_AND_OPENING_BRACE,0,HID_KEYBOARD_SC_BACKSPACE,0,0,HID_KEYBOARD_SC_LEFT_SHIFT, + 0,HID_KEYBOARD_SC_A,HID_KEYBOARD_SC_S,HID_KEYBOARD_SC_D,HID_KEYBOARD_SC_F,HID_KEYBOARD_SC_J,HID_KEYBOARD_SC_K,HID_KEYBOARD_SC_L,HID_KEYBOARD_SC_SEMICOLON_AND_COLON,0,HID_KEYBOARD_SC_BACKSLASH_AND_PIPE,0,0,HID_KEYBOARD_SC_RIGHT_SHIFT, + 0,HID_KEYBOARD_SC_ESCAPE,0,HID_KEYBOARD_SC_F4,HID_KEYBOARD_SC_G,HID_KEYBOARD_SC_H,HID_KEYBOARD_SC_F6,0,HID_KEYBOARD_SC_APOSTROPHE_AND_QUOTE,HID_KEYBOARD_SC_LEFT_ALT,HID_KEYBOARD_SC_F11,HID_KEYBOARD_SC_SPACE,0,HID_KEYBOARD_SC_UP_ARROW, + HID_KEYBOARD_SC_RIGHT_CONTROL,HID_KEYBOARD_SC_Z,HID_KEYBOARD_SC_X,HID_KEYBOARD_SC_C,HID_KEYBOARD_SC_V,HID_KEYBOARD_SC_M,HID_KEYBOARD_SC_COMMA_AND_LESS_THAN_SIGN,HID_KEYBOARD_SC_DOT_AND_GREATER_THAN_SIGN,0,0,HID_KEYBOARD_SC_ENTER,0,0,0, + 0,0,0,0,HID_KEYBOARD_SC_B,HID_KEYBOARD_SC_N,0,HID_KEYBOARD_SC_COMPOSE,HID_KEYBOARD_SC_SLASH_AND_QUESTION_MARK,HID_KEYBOARD_SC_RIGHT_ALT,HID_KEYBOARD_SC_F12,HID_KEYBOARD_SC_DOWN_ARROW,HID_KEYBOARD_SC_RIGHT_ARROW,HID_KEYBOARD_SC_LEFT_ARROW, + 0,HID_KEYBOARD_SC_Q,HID_KEYBOARD_SC_W,HID_KEYBOARD_SC_E,HID_KEYBOARD_SC_R,HID_KEYBOARD_SC_U,HID_KEYBOARD_SC_I,HID_KEYBOARD_SC_O,HID_KEYBOARD_SC_P,0,0,0,0,0, + HID_KEYBOARD_SC_F5,HID_KEYBOARD_SC_1_AND_EXCLAMATION,HID_KEYBOARD_SC_2_AND_AT,HID_KEYBOARD_SC_3_AND_HASHMARK,HID_KEYBOARD_SC_4_AND_DOLLAR,HID_KEYBOARD_SC_7_AND_AMPERSAND,HID_KEYBOARD_SC_8_AND_ASTERISK,HID_KEYBOARD_SC_9_AND_OPENING_PARENTHESIS,HID_KEYBOARD_SC_0_AND_CLOSING_PARENTHESIS,HID_KEYBOARD_SC_PRINT_SCREEN,HID_KEYBOARD_SC_F10,0,0,0, + + HID_KEYBOARD_SC_LEFT_CONTROL,HID_KEYBOARD_SC_GRAVE_ACCENT_AND_TILDE,HID_KEYBOARD_SC_POWER,HID_KEY_WLAN,HID_KEYBOARD_SC_5_AND_PERCENTAGE,HID_KEYBOARD_SC_6_AND_CARET,HID_KEYBOARD_SC_EQUAL_AND_PLUS,HID_KEY_BRIGTHNESS_UP,HID_KEYBOARD_SC_MINUS_AND_UNDERSCORE,0,HID_KEY_DISPLAY_SWITCH,HID_KEYBOARD_SC_DELETE,0,0, + 0,HID_KEYBOARD_SC_TAB,HID_KEYBOARD_SC_CAPS_LOCK,HID_KEY_LOCK_TOUCHPAD,HID_KEYBOARD_SC_T,HID_KEYBOARD_SC_Y,HID_KEYBOARD_SC_CLOSING_BRACKET_AND_CLOSING_BRACE,HID_KEY_BRIGTHNESS_DOWN,HID_KEYBOARD_SC_OPENING_BRACKET_AND_OPENING_BRACE,0,HID_KEYBOARD_SC_BACKSPACE,0,0,HID_KEYBOARD_SC_LEFT_SHIFT, + 0,HID_KEYBOARD_SC_A,HID_KEYBOARD_SC_S,HID_KEYBOARD_SC_D,HID_KEYBOARD_SC_F,HID_KEYBOARD_SC_KEYPAD_1_AND_END,HID_KEYBOARD_SC_KEYPAD_2_AND_DOWN_ARROW,HID_KEYBOARD_SC_KEYPAD_3_AND_PAGE_DOWN,HID_KEYBOARD_SC_KEYPAD_MINUS,0,HID_KEYBOARD_SC_BACKSLASH_AND_PIPE,0,0,HID_KEYBOARD_SC_RIGHT_SHIFT, + 0,HID_KEYBOARD_SC_ESCAPE,0, HID_KEYBOARD_SC_VOLUME_DOWN,HID_KEYBOARD_SC_G,HID_KEYBOARD_SC_H,HID_KEYBOARD_SC_MUTE,0,HID_KEYBOARD_SC_APOSTROPHE_AND_QUOTE,HID_KEYBOARD_SC_LEFT_ALT,HID_KEYBOARD_SC_INSERT,HID_KEYBOARD_SC_SPACE,0,HID_KEYBOARD_SC_PAGE_UP, + HID_KEYBOARD_SC_RIGHT_CONTROL,HID_KEYBOARD_SC_Z,HID_KEYBOARD_SC_X,HID_KEYBOARD_SC_C,HID_KEYBOARD_SC_V,HID_KEYBOARD_SC_KEYPAD_0_AND_INSERT ,HID_KEYBOARD_SC_COMMA_AND_LESS_THAN_SIGN,HID_KEYBOARD_SC_DOT_AND_GREATER_THAN_SIGN,0,0,HID_KEYBOARD_SC_ENTER,0,0,0, + 0,0,0,0,HID_KEYBOARD_SC_B,HID_KEYBOARD_SC_N,0,HID_KEYBOARD_SC_COMPOSE,HID_KEYBOARD_SC_KEYPAD_PLUS,HID_KEYBOARD_SC_RIGHT_ALT,HID_KEYBOARD_SC_F12,HID_KEYBOARD_SC_PAGE_DOWN,HID_KEYBOARD_SC_END,HID_KEYBOARD_SC_HOME, + 0,HID_KEYBOARD_SC_Q,HID_KEYBOARD_SC_W,HID_KEYBOARD_SC_E,HID_KEYBOARD_SC_R,HID_KEYBOARD_SC_KEYPAD_4_AND_LEFT_ARROW,HID_KEYBOARD_SC_KEYPAD_5 ,HID_KEYBOARD_SC_KEYPAD_6_AND_RIGHT_ARROW,HID_KEYBOARD_SC_KEYPAD_ASTERISK ,0,0,0,0,0, + HID_KEYBOARD_SC_VOLUME_UP ,HID_KEYBOARD_SC_1_AND_EXCLAMATION,HID_KEYBOARD_SC_2_AND_AT,HID_KEYBOARD_SC_3_AND_HASHMARK,HID_KEYBOARD_SC_4_AND_DOLLAR,HID_KEYBOARD_SC_7_AND_AMPERSAND,HID_KEYBOARD_SC_8_AND_ASTERISK,HID_KEYBOARD_SC_9_AND_OPENING_PARENTHESIS,HID_KEYBOARD_SC_KEYPAD_SLASH,HID_KEYBOARD_SC_NUM_LOCK ,HID_KEYBOARD_SC_PAUSE,0,0,0 + +}; + + +const int keym[112] = {HID_KEYBOARD_MODIFIER_LEFTCTRL,0,0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,HID_KEYBOARD_MODIFIER_LEFTGUI,HID_KEYBOARD_MODIFIER_LEFTSHIFT, + 0,0,0,0,0,0,0,0,0,0,0,0,0,HID_KEYBOARD_MODIFIER_RIGHTSHIFT, + 0,0,0,0,0,0,0,0,0,HID_KEYBOARD_MODIFIER_LEFTALT,0,0,0,0, + HID_KEYBOARD_MODIFIER_RIGHTCTRL ,0,0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,HID_KEYBOARD_MODIFIER_RIGHTALT,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0}; + + +//const int rowX[14]={12,13,5,6,1,A4,A1,7,A3,30,A2,A0,31,4}; +const uint8_t rowY[8]={0xbf,0xfd,0x7f,0xfe,0xef,0xdf,0xfb,0xf7}; +const uint8_t rowYN[8]={0x40,0x02,0x80,0x01,0x10,0x20,0x04,0x08}; + + + +#define INT_PIN PIN2 + +bool key_fn = false; +bool ActionSend = false; +bool tap_enabled = true; + +int oldbutton; +uint8_t tpdata[0x20]; +uint16_t lastposX=0xffff; +uint16_t lastposY=0xffff; + +uint8_t button = 0; +uint8_t keyc; +uint8_t colmn; +uint8_t lastfingers; +uint8_t tpguard; +uint8_t touch_to; +bool drag = false; +bool TouchPadLocked = false; +bool tp_guard = false; +bool ReadTP = false; +bool safeclick = true; +#define MOUSE_LEFT (1<<0) +#define MOUSE_RIGTH (1<<1) +#define MOUSE_MIDDLE (1<<2) +#define DELTAX 6 +#define DELTAY 5 +#define WHEEL 1 +#define HYST 1 +#define DRAG_HYST 5 +uint8_t ticks; +uint8_t mouse = 0; +uint16_t MR_X; +uint16_t MR_Y; +uint8_t MR_B; +uint8_t MR_W; +uint8_t dragtime; +uint8_t speedlimit; +#define DRAGTIME 8 + +#define MINPRESS 3 +#define min_CLICK_MS CLICK_MS-MINPRESS +uint8_t presstime; +#define DRAG_ENABLED 1 +#define TP_LOCK 20 +#define TAP_ENABLED 1 + +uint8_t time_zero; +uint8_t time_one; +uint8_t time_two; +uint8_t time_pressed; +#define PRETAP 3 +#define CLICK_MS 8 +uint8_t MR_B_REQ = 0; +#define TOUCH_TO 8 +uint16_t startposX=0xffff; +uint16_t startposY=0xffff; +bool itsDone = false; +#endif + + + diff --git a/TERES-HID/KeyboardMouse.txt b/TERES-HID/KeyboardMouse.txt new file mode 100644 index 0000000..262a84f --- /dev/null +++ b/TERES-HID/KeyboardMouse.txt @@ -0,0 +1,81 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Dual HID Keyboard and Mouse Device Demo + * + * \section Sec_Compat Demo Compatibility: + * + * The following list indicates what microcontrollers are compatible with this demo. + * + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) + * \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2) + * \li Series AU XMEGA AVRs (ATXMEGAxxxAxU) + * \li Series B XMEGA AVRs (ATXMEGAxxxBx) + * \li Series C XMEGA AVRs (ATXMEGAxxxCx) + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this demo. + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + * + *
USB Mode:Device
USB Class:Human Interface Device (HID)
USB Subclass:N/A
Relevant Standards:USBIF HID Specification \n + * USBIF HID Usage Tables
Supported USB Speeds:Low Speed Mode \n + * Full Speed Mode
+ * + * \section Sec_Description Project Description: + * + * Keyboard/Mouse demonstration application. This gives a simple reference + * application for implementing a composite device containing both USB Keyboard + * and USB Mouse functionality using the basic USB HID drivers in all modern OSes + * (i.e. no special drivers required). This example uses two separate HID + * interfaces for each function. It is boot protocol compatible, and thus works under + * compatible BIOS as if it was a native keyboard and mouse (e.g. PS/2). + * + * On start-up the system will automatically enumerate and function + * as a keyboard when the USB connection to a host is present and the HWB is not + * pressed. When enabled, manipulate the joystick to send the letters + * a, b, c, d and e. See the USB HID documentation for more information + * on sending keyboard event and key presses. + * + * When the HWB is pressed, the mouse mode is enabled. When enabled, move the + * joystick to move the pointer, and push the joystick inwards to simulate a + * left-button click. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * + * + * + * + * + *
+ * None + *
+ */ + diff --git a/TERES-HID/asf.xml b/TERES-HID/asf.xml new file mode 100644 index 0000000..4b5ca01 --- /dev/null +++ b/TERES-HID/asf.xml @@ -0,0 +1,62 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a pair of HID interfaces. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/TERES-HID/doxyfile b/TERES-HID/doxyfile new file mode 100644 index 0000000..6648a78 --- /dev/null +++ b/TERES-HID/doxyfile @@ -0,0 +1,2395 @@ +# Doxyfile 1.8.9 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all text +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv +# for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = "LUFA Library - Combined Keyboard/Mouse Device Demo" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = ./Documentation/ + +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- +# directories (in 2 levels) under the output directory of each output format and +# will distribute the generated files over these directories. Enabling this +# option can be useful when feeding doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. +# The default value is: NO. + +CREATE_SUBDIRS = NO + +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = YES + +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:\n" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". You can put \n's in the value part of an alias to insert +# newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding "class=itcl::class" +# will allow you to use the command class in the itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by doxygen: IDL, Java, Javascript, +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# +# Note: For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you can +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = NO + +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# will parse them like normal C++ but will assume all classes use public instead +# of private inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = YES + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. If set to YES, local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO, only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO, these classes will be included in the various overviews. This option +# has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# (class|struct|union) declarations. If set to NO, these declarations will be +# included in the documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO, these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file +# names in lower-case letters. If set to YES, upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. +# The default value is: system dependent. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES, the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = YES + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. +# The default value is: YES. + +GENERATE_TODOLIST = NO + +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. +# The default value is: YES. + +GENERATE_TESTLIST = NO + +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = NO + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if ... \endif and \cond +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. +# +# Note that if you run doxygen from a directory containing a file called +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. See also \cite for info how to create references. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = YES + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some parameters +# in a documented function, or documenting parameters that don't exist or using +# markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO, doxygen will only warn about wrong or incomplete +# parameter documentation, but not about the absence of documentation. +# The default value is: NO. + +WARN_NO_PARAMDOC = YES + +# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. +# Note: If this tag is empty the current directory is searched. + +INPUT = ./ + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# possible encodings. +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank the +# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, +# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, +# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, +# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, +# *.qsf, *.as and *.js. + +FILE_PATTERNS = *.h \ + *.c \ + *.txt + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = Documentation/ + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* + +EXCLUDE_SYMBOLS = __* \ + INCLUDE_FROM_* + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# +# +# where is the value of the INPUT_FILTER tag, and is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# classes and enums directly into the documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# function all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = NO + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see http://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = NO + +# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the +# cost of reduced performance. This can be particularly helpful with template +# rich C++ code for which doxygen's built-in parser lacks the necessary type +# information. +# Note: The availability of this option depends on whether or not doxygen was +# compiled with the --with-libclang option. +# The default value is: NO. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified with INPUT and INCLUDE_PATH. +# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. + +CLANG_OPTIONS = + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = YES + +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in +# which the alphabetical index list will be split. +# Minimum value: 1, maximum value: 20, default value: 5. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). For an example see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the style sheet and background images according to +# this color. Hue is specified as an angle on a colorwheel, see +# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use grayscales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_TIMESTAMP = NO + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = YES + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: http://developer.apple.com/tools/xcode/), introduced with +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# Makefile in the HTML output directory. Running make will produce the docset in +# that directory and running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# Windows. +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler (hhc.exe). If non-empty, +# doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the master .chm file (NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = YES + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location of Qt's +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the +# generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = YES + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can +# further fine-tune the look of the index. As an example, the default style +# sheet generated by doxygen has an example that shows how to put an image at +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has +# the same information as the tab index, you could consider setting +# DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = YES + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 1 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are not +# supported properly for IE 6.0, but are supported on all modern browsers. +# +# Note that when changing this option you need to delete any form_*.png files in +# the HTML output directory before the changes have effect. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# http://www.mathjax.org) which uses client side Javascript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. See the MathJax site (see: +# http://docs.mathjax.org/en/latest/output.html) for more details. +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility), NativeMML (i.e. MathML) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from http://www.mathjax.org before deployment. +# The default value is: http://cdn.mathjax.org/mathjax/latest. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for +# the HTML output. The underlying search engine uses javascript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the javascript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use + S +# (what the is depends on the OS and browser, but it is typically +# , /