Hood Scarf
==========

.. figure:: hood_scarf.jpg
   :align: center

.. only:: html

   .. contents::

For all of your post-apocalyptic needs, a pattern for a very simple
hood-scarf.

This is a zero-waste pattern, resulting in a square hood.

It is a quick and easy project, suitable for handsewing even with the
limited kit you've been able to grab just before the Fall of
Civilization (finding the materials is left as an exercise to the
reader), but can also be mostly machine sewn.

Materials
---------

Fabric
^^^^^^

* 70 - 80 cm of a light to mid weight fabric; wool or linen are good
  choices.

Two scarves of the same size, at least 30 cm wide and 120 cm long can
also be used: in this case there won't be a need to hem the long edges.

Notions
^^^^^^^

* Sewing thread to match the fabric.

Pattern
-------

Measure around your head, at the height of the forehead, and around the
face from the top of the head to the chin; take the biggest measurement
and divide it by two: this is the *minimum* width of the scarf, if you
want a deeper hood add maybe a cm or two. This will probably be
somewhere between 30 and 35 cm.

Cut two rectangles of fabric as high as the measurement above plus 2-4
cm for hemming allowance and using the full width of the fabric,
keeping the selvedges.

Instructions
------------

Put the two pieces right sides together and sew one short edge with a
running backstitch (by hand) or by machine. Press open.

.. tip::

   Optionally you may want to curve down the seam a little towards the
   back.

Hem the long sides: fold them down twice towards the wrong sides, sew
with a hemstitch by hand or topstitch by machine.

Fold the scarf in half, right sides together; starting from the top
measure the width of the scarf and whipstitch the back seam for that
length.

.. tip::

   This last seam is easier to do by hand; if you want to use a machine
   you may want to lay the two halves side by side and topstitch with a
   zig-zag stitch, but the area near the top seam will be quite fussy.

See Also
--------