From 9ff70046f1610f4cfb97aec0da43ab557dbbf323 Mon Sep 17 00:00:00 2001 From: Elena ``of Valhalla'' Grandi Date: Tue, 15 Apr 2025 20:12:06 +0200 Subject: some instructions --- .../headwear/pointy_hat/index.rst | 23 +++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'source') diff --git a/source/contemporary_unisex/headwear/pointy_hat/index.rst b/source/contemporary_unisex/headwear/pointy_hat/index.rst index 76b45e1..a574e1e 100644 --- a/source/contemporary_unisex/headwear/pointy_hat/index.rst +++ b/source/contemporary_unisex/headwear/pointy_hat/index.rst @@ -99,8 +99,29 @@ but the buckram brim on top, sew the outer edge. Put a length of milliner wire along the outer edge, just inside the seam, sew it by hand to the buckram. -Grade and clip the allowance and turn the brim inside out. +Grade and clip the allowance and turn the brim inside out. Press +Optionally, topstitch all around the brim, just inside the wire, using a +zipper foot to avoid catching the wire with the needle. + +Pin the cone in the brim at every quarter, eight and sixteenth point. + +Clip at least the buckram layer of the brim, and sew. + +Notch also the cone allowances, and press up into the hat. + +If making `Ear Flaps`_, add them now. + +Fold the lining in half, right sides together, sew the side seam. + +Pin the allowances of the lining to the allowances of the hat, +whipstitch them together by hand so that the lining remains connected to +the hat for its whole length. + +Pin the edge of the lining to the other allowances, optionally baste. + +Also pin the tape so that one edge just covers the seam, sew all of the +layers 1 mm from the previous seam, towards the allowances. Variants -------- -- cgit v1.2.3