From 9110cc3a08a9008cf1d4b74444b8a21c1d1ddbbb Mon Sep 17 00:00:00 2001 From: Elena ``of Valhalla'' Grandi Date: Sat, 27 Aug 2022 19:49:15 +0200 Subject: finishing sleeves --- source/historical_menswear/shirts/1880_shirt/index.rst | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'source/historical_menswear/shirts/1880_shirt/index.rst') diff --git a/source/historical_menswear/shirts/1880_shirt/index.rst b/source/historical_menswear/shirts/1880_shirt/index.rst index 5dcfee7..9576f22 100644 --- a/source/historical_menswear/shirts/1880_shirt/index.rst +++ b/source/historical_menswear/shirts/1880_shirt/index.rst @@ -504,11 +504,24 @@ the top of the slit on both sides, pleating the top so that the slit edges are adiacent and using an applique stitch on the outside and a hemstitch on the inside. + +.. figure:: 0507-hemstitching_cuff.jpg + :align: center + + Run two lines of gathering thread close to the end of the sleeve, gather it to the length of the cuff. Press down the seaming allowance at the edge of the cuff and hemstitch it to the right side of sleeve, catching -each gather with a stitch. Hemstitch the cuff to the sleeve also on the -wrong side, again catching each gather. +each gather with a stitch. + +.. figure:: 0507-hemstitching_cuff_wrong_side.jpg + :align: center + +Hemstitch the cuff to the sleeve also on the wrong side, again catching +each gather. + +Add a button to the smaller side of the cuff and a corresponding +buttonhole to the larger part. Assembly of the body ^^^^^^^^^^^^^^^^^^^^ -- cgit v1.2.3