From 09179e79b3374f2b455f7341548b344278fbc375 Mon Sep 17 00:00:00 2001 From: Elena ``of Valhalla'' Grandi Date: Sun, 5 Jul 2020 19:13:46 +0200 Subject: Document folder: instructions --- document_folder_origami.rst | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 document_folder_origami.rst (limited to 'document_folder_origami.rst') diff --git a/document_folder_origami.rst b/document_folder_origami.rst new file mode 100644 index 0000000..c8d694a --- /dev/null +++ b/document_folder_origami.rst @@ -0,0 +1,31 @@ +***************** + Document Folder +***************** + +Instructions +============ + +Start with a rectangular piece of paper: A4 is a good size to start +with. + +1. Fold in half on the long side, crease and reopen. + +2. Fold in quarters, crease and reopen. + +3. Fold down the top and bottom edges a bit: this will be the width of + the spine and for A4 paper 1.5 cm is a good amount. + +4. Fold down the four corners to touch the quarter creases. + +5. Fold down the top and bottom edges, following the quarter creases. + +6. Mountain fold the side edges; turn over the model. + +7. Insert the left side in the triangular flaps of the right side. + +8. Fold in half on the remaining crease. + +9. Turn conterclockwise 90°, done. + +Paper size suggestions +====================== -- cgit v1.2.3