From 383e014cb7695b9dce568d953dc0673565691024 Mon Sep 17 00:00:00 2001 From: Elena ``of Valhalla'' Grandi Date: Sun, 28 Apr 2024 20:40:54 +0200 Subject: some instructions --- .../bookbinding/cartonnage/ink_drawers/index.rst | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'source') diff --git a/source/bookbinding/cartonnage/ink_drawers/index.rst b/source/bookbinding/cartonnage/ink_drawers/index.rst index 6e86ab0..6058b37 100644 --- a/source/bookbinding/cartonnage/ink_drawers/index.rst +++ b/source/bookbinding/cartonnage/ink_drawers/index.rst @@ -18,6 +18,7 @@ You will need: * bookbinding board, 1 mm thick; * bookbinding cloth or cloth-like paper; * decorative paper such as that used for book end sheets; +* narrow ribbon; plus @@ -44,6 +45,42 @@ Cutting Cut all the pieces in the appropriate material. +Drawers +^^^^^^^ + +Using contact glue attach the back side to the plate, + +then the two lateral sides + +and finally the front. + +Spread PVA on the bookcloth for the sides, put the drawer so that it is +centered on the shorter side and wrap the bookcloth all around the +drawer, keeping the join as close as possible to one of the back +corners. + +Clip the corners of the bookcloth and let the excess adhere to the +bottom and to the inside of the drawer. + +Spread PVA on the bookcloth for the bottom, put it on the bottom. + +Cut 5 cm of ribbon, fold it in half, and attach it with contact glue to +the middle of the front of the drawer, extending from the edge by 1.25 cm. + +Spread PVA on the one of the wider side linings, put it in the back of +the drawer, starting 2 mm from the top edge and extending on both sides. +Repeat for the front of the drawer. + +Spread PVA on the narrower side linings, put them in the sides of the +drawer, starting again 2 mm from the top edge. + +Spread PVA on the bottom lining, put it in the bottom of the drawer. + +Assemble the optional divider inserting each piece in the slots of three +other pieces. + +Repeat for all other drawers. + Structure ^^^^^^^^^ -- cgit v1.2.3