From 11fa7b494abbdec645344f2d742f0b3215a9dff7 Mon Sep 17 00:00:00 2001
From: Elena ``of Valhalla'' Grandi <valhalla@trueelena.org>
Date: Sun, 30 Jul 2023 20:13:27 +0200
Subject: Origami Document folder instructions

---
 .../origami/document_folder/index.rst              | 60 ++++++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 source/folding_paper/origami/document_folder/index.rst

(limited to 'source/folding_paper/origami/document_folder/index.rst')

diff --git a/source/folding_paper/origami/document_folder/index.rst b/source/folding_paper/origami/document_folder/index.rst
new file mode 100644
index 0000000..c9e2e6d
--- /dev/null
+++ b/source/folding_paper/origami/document_folder/index.rst
@@ -0,0 +1,60 @@
+Document Folder
+===============
+
+.. .. figure:: document_folder.jpg
+   :align: center
+
+.. only:: html
+
+   .. contents::
+
+This is a practical and useful document folder with a lot of pockets.
+
+The model is not mine, but I've found it somewhere on the internet in
+the early 2000s and can't find the original source. I've drawn and
+written the instructions from scratch by looking at a model I had folded
+back then.
+
+Materials
+---------
+
+You will need a rectangular sheet of paper.
+
+The size of the fold at step 3 will be size of the spine, and will also
+regulate how much overlap there will be at step 7 to hold the folder
+together.
+
+Some size suggestions:
+
+* A4 paper with 1.5 cm fold: good for A8 paper and 85 mm * 54 mm
+  business cards;
+
+* 60 cm × 40 cm with 4 cm fold: suitable for A6 paper;
+
+* 50 cm x 70 cm with 4 cm fold: suitable for A5 paper.
+
+Instructions
+------------
+
+.. figure:: document_folder_origami.svg
+   :align: center
+
+1. Fold in half on the long side, crease and reopen.
+
+2. Fold in quarters, crease and reopen.
+
+3. Fold down the top and bottom edges a bit: this will be the width of
+   the spine.
+
+4. Fold down the four corners to touch the quarter creases.
+
+5. Fold down the top and bottom edges, following the quarter creases.
+
+6. Mountain fold the side edges; turn over the model.
+
+7. Insert the left side in the triangular flaps of the right side.
+
+8. Fold in half on the remaining crease.
+
+9. Turn conterclockwise 90°, done.
+
-- 
cgit v1.2.3