From 7bd1d6c069bfe92a73367984930e8d7333793513 Mon Sep 17 00:00:00 2001
From: Elena of Valhalla'' Grandi <valhalla@trueelena.org>
Date: Mon, 30 Mar 2015 10:46:39 +0200
Subject: Improved position for screw holes

---
 parts/shelf_support_below.scad | 42 ++++++++++++++++++++----------------------
 1 file changed, 20 insertions(+), 22 deletions(-)

(limited to 'parts')

diff --git a/parts/shelf_support_below.scad b/parts/shelf_support_below.scad
index ed7a791..022751d 100644
--- a/parts/shelf_support_below.scad
+++ b/parts/shelf_support_below.scad
@@ -6,6 +6,13 @@ screw_radius = 1.5;
 screw_head_radius = 2.5;
 screw_head_h = 2;
 
+screw_hole_pos = [
+   [screw_radius+wall,          -screw_radius-wall,    0],
+   [radius*2+wall-screw_radius, -screw_radius-wall,    0],
+   [radius*2+wall-screw_radius, len+screw_radius+wall, 0],
+   [screw_radius+wall,          len+screw_radius+wall, 0],
+];
+
 module screw_hole() {
     union() {
         translate([0, 0, -1])cylinder(r=screw_radius, h=wall+2);
@@ -16,32 +23,23 @@ module screw_hole() {
 
 difference() {
     union() {
-        translate([wall, 0, 0]) 
-            cube([len-wall*2, (radius+wall)*2, radius+wall]);
+        cube([(radius+wall)*2, len, radius+wall]);
         hull() {
-            translate([screw_radius+wall, -screw_radius-wall, 0]) 
-                cylinder(r=screw_radius+wall, h=wall);
-            translate([len-screw_radius-wall, radius*2+wall*3+screw_radius, 0]) 
-                cylinder(r=screw_radius+wall, h=wall);
+            translate(screw_hole_pos[0]) cylinder(r=screw_radius+wall, h=wall);
+            translate(screw_hole_pos[2]) cylinder(r=screw_radius+wall, h=wall);
         }
         hull() {
-            translate([screw_radius+wall, radius*2+wall*3+screw_radius, 0]) 
-                cylinder(r=screw_radius+wall, h=wall);
-            translate([len-screw_radius-wall, -screw_radius-wall, 0]) 
-                cylinder(r=screw_radius+wall, h=wall);
+            translate(screw_hole_pos[1]) cylinder(r=screw_radius+wall, h=wall);
+            translate(screw_hole_pos[3]) cylinder(r=screw_radius+wall, h=wall);
         }
         translate([screw_radius+wall, -screw_radius-wall, 0]) 
-            cube([len-(screw_radius+wall)*2, screw_radius+wall, wall]);
-        translate([screw_radius+wall, (radius+wall)*2, 0]) 
-            cube([len-(screw_radius+wall)*2, screw_radius+wall, wall]);
+            cube([(radius-screw_radius)*2, screw_radius+wall, wall]);
+        translate([screw_radius+wall, len, 0]) 
+            cube([(radius-screw_radius)*2, screw_radius+wall, wall]);
+    }
+    translate([radius+wall, -1, radius+wall]) 
+        rotate([-90, 0, 0]) cylinder(r=radius, h=len+2);
+    for (i = [0:3]) {
+       translate(screw_hole_pos[i]) screw_hole();
     }
-    translate([-1, radius+wall, radius+wall]) rotate([0, 90, 0]) cylinder(r=radius, h=len+2);
-        translate([screw_radius+wall, -screw_radius-wall, 0])
-            screw_hole();
-        translate([len-screw_radius-wall, radius*2+wall*3+screw_radius, 0])
-            screw_hole();
-        translate([screw_radius+wall, radius*2+wall*3+screw_radius, 0])
-            screw_hole();
-        translate([len-screw_radius-wall, -screw_radius-wall, 0])
-            screw_hole();
 }
-- 
cgit v1.2.3