From 8e3d79a1f945007eefce26363eeb540dd6cf2ad9 Mon Sep 17 00:00:00 2001 From: Elena ``of Valhalla'' Grandi Date: Tue, 10 Nov 2015 17:52:31 +0100 Subject: Updated Makefile and slic3r config --- conf/connectors.ini | 55 ++++++++++++++++++++++++++++++++--------------------- 1 file changed, 33 insertions(+), 22 deletions(-) (limited to 'conf/connectors.ini') diff --git a/conf/connectors.ini b/conf/connectors.ini index f26513c..0e4f3a8 100644 --- a/conf/connectors.ini +++ b/conf/connectors.ini @@ -1,21 +1,24 @@ -# generated by Slic3r 1.1.6 on Thu Aug 21 10:00:53 2014 +# generated by Slic3r 1.2.9 on Tue Nov 10 17:43:16 2015 avoid_crossing_perimeters = 1 -bed_size = 200,200 +bed_shape = 0x0,200x0,200x200,0x200 bed_temperature = 0 +before_layer_gcode = bottom_solid_layers = 3 bridge_acceleration = 0 bridge_fan_speed = 100 bridge_flow_ratio = 1 -bridge_speed = 80 +bridge_speed = 60 brim_width = 0 complete_objects = 0 cooling = 1 default_acceleration = 0 -disable_fan_first_layers = 1 +disable_fan_first_layers = 3 dont_support_bridges = 1 duplicate_distance = 6 end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n -external_perimeter_speed = 70% +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 50% external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 @@ -26,6 +29,7 @@ extrusion_multiplier = 1 extrusion_width = 0 fan_always_on = 0 fan_below_layer_time = 60 +filament_colour = #FFFFFF filament_diameter = 3 fill_angle = 45 fill_density = 40% @@ -33,10 +37,9 @@ fill_pattern = honeycomb first_layer_acceleration = 0 first_layer_bed_temperature = 0 first_layer_extrusion_width = 200% -first_layer_height = 0.3 -first_layer_speed = 40% -first_layer_temperature = 200 -g0 = 0 +first_layer_height = 0.25 +first_layer_speed = 30 +first_layer_temperature = 205 gap_fill_speed = 20 gcode_arcs = 0 gcode_comments = 0 @@ -47,16 +50,21 @@ infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 +infill_overlap = 15% infill_speed = 80 interface_shells = 0 layer_gcode = -layer_height = 0.3 +layer_height = 0.25 max_fan_speed = 100 +max_print_speed = 80 +max_volumetric_speed = 0 min_fan_speed = 35 min_print_speed = 4 -min_skirt_length = 2 +min_skirt_length = 5 notes = nozzle_diameter = 0.5 +octoprint_apikey = +octoprint_host = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode @@ -64,36 +72,37 @@ overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 -perimeter_speed = 40 +perimeter_speed = 60 perimeters = 3 post_process = -print_center = 100,100 +pressure_advance = 0 raft_layers = 0 resolution = 0 retract_before_travel = 2 -retract_layer_change = 1 +retract_layer_change = 0 retract_length = 2 retract_length_toolchange = 10 retract_lift = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 -retract_speed = 30 +retract_speed = 40 seam_position = aligned skirt_distance = 6 skirt_height = 1 -skirts = 1 +skirts = 2 slowdown_below_layer_time = 30 -small_perimeter_speed = 30 -solid_fill_pattern = rectilinear +small_perimeter_speed = 15 solid_infill_below_area = 70 solid_infill_every_layers = 0 +solid_infill_extruder = 1 solid_infill_extrusion_width = 0 -solid_infill_speed = 80 +solid_infill_speed = 20 spiral_vase = 0 standby_temperature_delta = -5 start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n support_material = 1 support_material_angle = 0 +support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0 @@ -109,12 +118,14 @@ temperature = 195 thin_walls = 1 threads = 2 toolchange_gcode = -top_infill_extrusion_width = 85% -top_solid_infill_speed = 50 -top_solid_layers = 5 +top_infill_extrusion_width = 0 +top_solid_infill_speed = 15 +top_solid_layers = 3 travel_speed = 130 use_firmware_retraction = 0 use_relative_e_distances = 0 +use_volumetric_e = 0 vibration_limit = 0 wipe = 0 +xy_size_compensation = 0 z_offset = 0 -- cgit v1.2.3