From af53395f2d0121fe1fe41620fc11ca1336b77d79 Mon Sep 17 00:00:00 2001 From: Elena ``of Valhalla'' Grandi Date: Wed, 13 Jul 2016 22:21:49 +0200 Subject: removed generated .md README --- README.md | 56 -------------------------------------------------------- 1 file changed, 56 deletions(-) delete mode 100644 README.md (limited to 'README.md') diff --git a/README.md b/README.md deleted file mode 100644 index 5e96da3..0000000 --- a/README.md +++ /dev/null @@ -1,56 +0,0 @@ -Tubular Structures -================== - -This project aims to build a number of useful structures out of easily -sourceable aluminium tubes that easily fit in the boot of a compact car -and custom 3Dprinted joints. - -Already buildable structures include a number of banner stands and -parasols. - -Instructions ------------- - -### Building the 3D models - -To generate the .stl files for each piece you need Make (tested with -[GNU Make](https://www.gnu.org/software/make/)) and -[OpenSCAD](http://www.openscad.org/); one you have installed these -dependencies just run: - - $ make - -from the root directory of this repository and wait. - -Example settings for [Slic3r](http://slic3r.org/) are available in the -conf directory: you can load them in Slic3r, change the settings -(expecially those related to the printer) and re-export them in place. -Then you can use: - - $ make gcode - -from the root directory of the repository to generate .gcode files which -can be sent to your printer. - -### Assembly - -To assembly most structures you'll need a number of 1m long aluminium -tubes; the models assume that they are 16mm in diameter, but they can be -customized. - -### Readme - -The file README.md is generated from README.rst with: - - pandoc -o README.md README.rst - -and is included in the repo for the benefit of gitorious. - -License -------- - -Copyright 2013-2014 Elena Grandi - -This work is licensed under the Creative Commons Attribution-ShareAlike -4.0 International License. To view a copy of this license, visit -. -- cgit v1.2.3