From ac52ad9e17532abba5e6d6ca25d3a2d15ede59a2 Mon Sep 17 00:00:00 2001 From: Elena ``of Valhalla'' Grandi Date: Wed, 16 Apr 2014 22:35:25 +0200 Subject: README and license --- README.md | 56 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 README.md (limited to 'README.md') diff --git a/README.md b/README.md new file mode 100644 index 0000000..5e96da3 --- /dev/null +++ b/README.md @@ -0,0 +1,56 @@ +Tubular Structures +================== + +This project aims to build a number of useful structures out of easily +sourceable aluminium tubes that easily fit in the boot of a compact car +and custom 3Dprinted joints. + +Already buildable structures include a number of banner stands and +parasols. + +Instructions +------------ + +### Building the 3D models + +To generate the .stl files for each piece you need Make (tested with +[GNU Make](https://www.gnu.org/software/make/)) and +[OpenSCAD](http://www.openscad.org/); one you have installed these +dependencies just run: + + $ make + +from the root directory of this repository and wait. + +Example settings for [Slic3r](http://slic3r.org/) are available in the +conf directory: you can load them in Slic3r, change the settings +(expecially those related to the printer) and re-export them in place. +Then you can use: + + $ make gcode + +from the root directory of the repository to generate .gcode files which +can be sent to your printer. + +### Assembly + +To assembly most structures you'll need a number of 1m long aluminium +tubes; the models assume that they are 16mm in diameter, but they can be +customized. + +### Readme + +The file README.md is generated from README.rst with: + + pandoc -o README.md README.rst + +and is included in the repo for the benefit of gitorious. + +License +------- + +Copyright 2013-2014 Elena Grandi + +This work is licensed under the Creative Commons Attribution-ShareAlike +4.0 International License. To view a copy of this license, visit +. -- cgit v1.2.3