From 04e090500e3f98ab8df843c472051ce6e1d14ce9 Mon Sep 17 00:00:00 2001 From: Elena of Valhalla'' Grandi Date: Wed, 5 Mar 2014 14:13:53 +0100 Subject: Improved pyramids --- Makefile | 5 ++- conf/pyramids.ini | 114 +++++++++++++++++++++++++++++++++++++++++++++++++++++ src/piecepack.scad | 1 + 3 files changed, 119 insertions(+), 1 deletion(-) create mode 100644 conf/pyramids.ini diff --git a/Makefile b/Makefile index f394ddc..2dca011 100644 --- a/Makefile +++ b/Makefile @@ -63,7 +63,7 @@ pyramids: done \ done -gcode: tiles coins dice saucers +gcode: tiles coins dice saucers pyramids for T in ${DESTDIR}/tile*.stl; do \ ${SLIC3R} --load ${CONFDIR}/tiles.ini $$T; \ done @@ -73,5 +73,8 @@ gcode: tiles coins dice saucers for T in ${DESTDIR}/die*.stl ${DESTDIR}/suite_die*.stl; do \ ${SLIC3R} --load ${CONFDIR}/dice.ini $$T; \ done + for T in ${DESTDIR}/pyramid*.stl; do \ + ${SLIC3R} --load ${CONFDIR}/pyramids.ini $$T; \ + done all: tiles coins dice pawns saucers pyramids diff --git a/conf/pyramids.ini b/conf/pyramids.ini new file mode 100644 index 0000000..bdbba8d --- /dev/null +++ b/conf/pyramids.ini @@ -0,0 +1,114 @@ +# generated by Slic3r 0.9.10b on Wed Mar 5 09:00:29 2014 +avoid_crossing_perimeters = 1 +bed_size = 200,200 +bed_temperature = 0 +bottom_solid_layers = 5 +bridge_acceleration = 0 +bridge_fan_speed = 100 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_width = 0 +complete_objects = 1 +cooling = 1 +default_acceleration = 0 +disable_fan_first_layers = 1 +duplicate = 1 +duplicate_distance = 6 +duplicate_grid = 1,1 +end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors +external_perimeter_speed = 70% +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 40 +extruder_clearance_radius = 40 +extruder_offset = 0x0 +extrusion_axis = E +extrusion_multiplier = 1 +extrusion_width = 0 +fan_always_on = 0 +fan_below_layer_time = 60 +filament_diameter = 3 +fill_angle = 45 +fill_density = 0.5 +fill_pattern = rectilinear +first_layer_bed_temperature = 0 +first_layer_extrusion_width = 200% +first_layer_height = 0.25 +first_layer_speed = 50% +first_layer_temperature = 205 +g0 = 0 +gap_fill_speed = 20 +gcode_arcs = 0 +gcode_comments = 0 +gcode_flavor = reprap +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_speed = 60 +layer_gcode = +layer_height = 0.20 +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 10 +min_skirt_length = 0 +notes = +nozzle_diameter = 0.5 +only_retract_when_crossing_perimeters = 1 +output_filename_format = [input_filename_base].gcode +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 150% +perimeter_speed = 30 +perimeters = 4 +post_process = +print_center = 100,100 +raft_layers = 0 +randomize_start = 0 +resolution = 0 +retract_before_travel = 2 +retract_layer_change = 1 +retract_length = 1 +retract_length_toolchange = 10 +retract_lift = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 30 +rotate = 0 +scale = 1 +skirt_distance = 6 +skirt_height = 1 +skirts = 3 +slowdown_below_layer_time = 30 +small_perimeter_speed = 30 +solid_fill_pattern = rectilinear +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extrusion_width = 0 +solid_infill_speed = 60 +spiral_vase = 0 +start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle +support_material = +support_material_angle = 0 +support_material_enforce_layers = 1 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_layers = 0 +support_material_interface_spacing = 0 +support_material_pattern = rectilinear +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_threshold = 0 +temperature = 205 +threads = 2 +toolchange_gcode = +top_infill_extrusion_width = 170% +top_solid_infill_speed = 60 +top_solid_layers = 7 +travel_speed = 130 +use_relative_e_distances = 0 +vibration_limit = 0 +wipe = 0 +z_offset = -0.5 diff --git a/src/piecepack.scad b/src/piecepack.scad index b35c6ad..0947862 100644 --- a/src/piecepack.scad +++ b/src/piecepack.scad @@ -104,6 +104,7 @@ module pyramid(w,h,suite,value) { difference() { plain_pyramid(w,h,0); plain_pyramid(w-4,h-4,-0.01); + translate([0,0,h]) cube(7, center=true); if ( suite != "null") { translate([0,-w/2+1,0]) rotate([atan(h/(w/2)),0,0]) linear_extrude(height=2) scale(0.9*w/50) translate([-25,0,0]) import(str("../graphics/",suite,".dxf")); -- cgit v1.2.3